Epson Stylus Pro 7880 User Manual page 133

Note: The EDM
STATUS option is for
future enhancements to
the printer.
Maintaining and Transporting the Printer
(This option must be enabled using maintenance mode on the
printer's control panel to display information. See page 149 for
instructions.)
To check the amount of ink left, press d to highlight
•
then press . The status of the first cartridge is displayed, using
Menu
the symbols described on page 134. Continue pressing d to see the
status of the remaining cartridges. When done, press l.
To check how much of the maintenance tank has been used, press
•
d to highlight
MAINTENANCE TANK
status of the tank is displayed, using the symbols described on
page 134. As the tank is filled, the percentage drops. When done,
press l.
To check the amount of ink used (in milliliters) and paper used
•
(in centimeters), press d to highlight
. When done, press l.
Menu
You can clear this setting with the
You can also change the units of measurement from centimeters to
inches and feet using maintenance mode on the printer's control
panel. See page 149 for instructions.
To check the job history, press d to highlight
•
press . For the last 10 print jobs saved in the printer, you see
Menu
the ink used (in milliliters) and paper used (in square centimeters).
The most recent job is saved as No. 0. When done, press l.
To check the total number of prints, press d to highlight
•
, then press
PRINTS
To check the status of other printer parts, press d to highlight
•
, then press
SERVICE LIFE
displayed, using the symbols described below. Continue pressing d
to see the status of the carriage motor, paper feed motor, print head,
cleaning unit, and pressure motor. When done, press l.
133
, then press
USAGE COUNT
CLEAR USAGE COUNT
. When done, press l.
Menu
. The status of the cutter is
Menu
| 133
,
INK LEVEL
. The
Menu
, then press
option.
, then
JOB HISTORY
TOTAL