Replacing The Paper Cutter Blade; Removing The Used Cutter Blade - Epson Pro 9000 Printer Manual

Warning
Be careful not to cut
yourself while replacing the
paper cutter blade.
Maintaining and Transporting the Printer

Replacing the Paper Cutter Blade

If you notice that your paper isn't cut cleanly, the cutter blade may need to
be replaced. If you use the blade to cut heavy stock or non-EPSON media,
you may need to replace it more often. You can also check the status of your
cutter by printing the status check sheet or using the Printer Status menu on
the control panel. See page 2-3 or 2-4 for instructions.
To obtain a new cutter blade (part number C815131), contact your dealer.
To replace the cutter blade, you first need to remove the used blade, as
described in the following section.

Removing the Used Cutter Blade

Make sure the printer is on, then follow these steps to remove the blade:
1. Press the
SelecType
appears on the display.
MENU
2. Press the button.
Item
3-11
button repeatedly until
Roll
Auto Cut
Roll
Cutter Off
CUT. REPLACE=EXEC.
|
CUTTER REPLACE
Paper Out
SelecType
Paper Source
Item
+
appears on the display.
3-11