Table of Contents
Advertisement
Adjusting the Cutting Height
Warning: Adjusting the cutting height could bring your hands into contact with a moving blade, and
result in serious injury.
•
Shut off the engine and wait for all movement to stop.
•
Do not put your fingers under the housing when adjusting the cutting height.
There are 7 cutting-height settings from 25 to 70 mm. Adjust the cutting height as desired. Set the front
wheels to the same height as the rear wheels.
To adjust the cutting height, disengage the lever, raise or lower the machine, and then engage the lever.
Figure 12.
The cutting height positions are shown in Figure 13.
Figure 12
1 2 3 4 5 6
Figure 13
18
7
EN
Advertisement
Table of Contents
