Setup; Assembling The Handle - Hayter CODE610B Operator's Manual

Setup

Important: Remove and discard the protective plastic sheet that covers the engine and any other plastic or
wrapping on the machine.

Assembling the Handle

Parts needed for this procedure:
2 Lower handle
4 Short bolt
4 Flat washer
4 Split washer
4 Nut
1 Upper handle
2 Handle knob
2 Curved washer
2 Long bolt
Procedure
1. Attach the lower handle to the mower housing with the 4 bolts, 4 flat washers, 4 split washers, and 4
nuts. Figure 3.
Figure 3
1. Short bolt (4)
2. Flat washer (4)
1
2
3
4
3. Split washer (4)
4. Nut (4)
9
EN