Hayter Harrier 41 PRO AD FS Operator's Manual
Hide thumbs
Also See for Harrier 41 PRO AD FS:
- Owner's handbook manual (24 pages) ,
- Operator's manual (36 pages) ,
- Owner's handbook manual (24 pages)
Related Manuals for Hayter Harrier 41 PRO AD FS
Summary of Contents for Hayter Harrier 41 PRO AD FS
- Page 1 Harrier 41 PRO AD FS CODE379B OPERATOR MANUAL Original Version (EN) From Serial Number: 406000000 and Up Issued: 17/01/2020 Part number: 3437-853 Rev A...
-
Page 3: Table Of Contents
CONTENTS Introduction Before Operation continued Non Grassed Areas Safety 6 - 9 Controls General Safety Before Mowing Safety Alert Symbol During Operation 15 - 16 Before Operation Safety Starting - General Safety Forward Travel - Fuel Safety Shutting off the Engine During Operation Safety Parking - General Safety... - Page 4 CONTENTS Maintenance continued Blade Brake Test Lubrication Storage Storage Safety Preparing the Mower for Storage Storage Removing the Mower from Storage Trouble Shooting Warranty EU Privacy Statement Notes...
-
Page 5: Introduction
Hayter Limited have designed and tested this machine for reasonably safe service; however, failure to comply with the instructions in this manual may result in personal injury. Hayter Limited reserves the right to amend product specifi cations without prior notifi cation. -
Page 6: Safety
SAFETY personal injury or death. Before Operation Safety - Fuel Safety General Safety You can fi nd additional safety information where This mower has been designed in accordance with EN needed throughout this manual. ISO 5395-2:2017. Fuel is extremely fl ammable and highly explosive. A fi... -
Page 7: During Operation Safety
3 seconds. If it doesn’t, stop using your mower immediately and contact a • Operate the engine only in well-ventilated areas. Hayter Authorised Service Dealer. Exhaust fumes contain carbon monoxide, which is lethal if inhaled. • Keep bystanders out of the operating area. Keep small children out of the operating area and under •... -
Page 8: After Operation Safety
SAFETY After Operation Safety - General Hayter replacement parts and accessories. Replacement parts and accessories made by other Safety manufacturers could be dangerous, and such use could void the product warranty. • Always shut off the machine, wait for all moving parts to stop, and allow the machine to cool before adjusting, servicing, cleaning, or storing it. -
Page 9: Safety & Instructional Decals
Please ensure all Safety Decals are secured on the mower before using the product. If any of the decals are missing or not secure, do not use the mower, contact your local Authorised Hayter Service Dealer for replacements. WARNING: Improper maintenance, use of non-conforming spare parts, or the removal or modifi cation of the safety decals may cause death or serious injury. -
Page 10: Product Overview
PRODUCT OVERVIEW PRODUCT SPECIFICATION Code 379B Model Harrier 41 PRO AD FS Weight (Net) inc. engine oil 41.2 kg Length 1470 mm Width 485 mm Height 1040 mm Width of Cut 410 mm Height of Cut 13 - 60 mm... -
Page 11: Setup
Ensure that the cables are routed to inside of the handle. Delivery Checklist Fuel Valve • If a cable is damaged, contact a Hayter Authorised Service Dealer. Check that the following items have been supplied For safety during transportation the fuel valve is set to correctly. -
Page 12: Engine Detail
SETUP 6. Insert the dipstick and tighten the cap securely. Engine Detail (Refer fi g.6) NOTE: Disconnect the spark plug lead and ensure that IMPORTANT: Running the engine with a low oil level the fuel valve is in the OFF position before performing can cause engine damage. -
Page 13: Before Operation
Authorised Hayter Service Dealer. 3. Remove the dipstick (1) and check the oil level. engine. 111-9367 - Lawn mower Oil SAE 30 Hayter 4. Re-insert the dipstick (1) into the oil fi ll neck and 111-9368 - Premium Fuel Treatment Hayter tighten the cap securely. -
Page 14: Adjusting The Cutting Height
BEFORE OPERATION stop the engine and set the mower to the maximum or result in damage to the mower. Remember the Adjusting the Cutting Height height of cut to protect the cutting mechanism. location of these obstructions and ensure that you (Refer fi... -
Page 15: During Operation
If the engine does not start after repeated attempts, to the edge. This is ideal for mowing around borders, have stopped. contact your local Hayter Authorised Service Dealer raised fl ower beds and retaining walls. (Refer fi g.16) or go to the Honda website. -
Page 16: Vari-Pitch™ Cutting Technology
(Refer fi g.21) (Refer fi g.19) ALWAYS replace a damaged blade. Consult your When collecting grass clippings it is important that the Authorised Hayter Service Dealer. Heavy Growth grass bag is emptied regularly to prevent blockages and engine overloading. Areas of heavy growth should be mown without Good grass collection depends on good air fl... -
Page 17: After Operation
Easy Wash™ port. (Refer fi g.26) (Refer fi g.25) WARNING: Improper maintenance, use of non If a cable is damaged, contact a Hayter Authorised conforming replacement components, or the removal Service Dealer. or modifi cation of the deck may cause death or 6. -
Page 18: Maintenance Schedule
MAINTENANCE SCHEDULE Note: Determine the left and right sides of the mower from the normal operating position. Recommended Maintenance Schedule Maintenance Service Interval Maintenance Procedure Before each use or daily Check the engine-oil level. Check the air fi lter. Clean grass clippings and dirt from under the mower. Check the condition of guards and safety devices. -
Page 19: Maintenance
MAINTENANCE damage the fi lter and solvents will dissolve the fi lter. Refer to Setup - Engine Oil Specifi cations to ensure Preparing for Maintenance you are using the correct grade of oil. 1. Remove the air fi lter cover (1) by unhooking the IMPORTANT: Before tipping the mower to change two upper tabs (2) on top of the air fi... -
Page 20: Servicing The Spark Plug
MAINTENANCE plug if there is apparent wear, or if the insulator Servicing the Spark Plug is cracked or chipped. Clean the spark plug with a wire brush if it is to be reused. Improper maintenance, use of nonconforming replacement components, or the modifi cation of the 4. -
Page 21: Remove & Replace The Blade
If you are uncomfortable performing this procedure or do not have a torque Blade Sharpening wrench, contact a Hayter Authorised Service Dealer. A slightly worn blade may be re-sharpened. Both blade WARNING: The blade is sharp; contacting the blade edges must be sharpened equally to ensure balance. -
Page 22: Clutch Cable Adjustment
60 mm from the handle. you release the engine stop lever, contact a Hayter or modifi cation of the rear defl ector may cause death Authorised Service Dealer. -
Page 23: Storage
STORAGE • Disconnect the lead from the spark plug. (Refer fi g.39) Storage Safety • Remove the spark plug, add 30 ml (1 fl oz) of Removing the Mower from Storage Always shut off the mower, wait for all moving engine oil through the spark-plug hole, and pull the parts to stop, and allow the mower to cool before engine start cord slowly several times to distribute... -
Page 24: Trouble Shooting
TROUBLE SHOOTING PROBLEM CAUSES CORRECTIVE ACTION PROBLEM CAUSES CORRECTIVE ACTION Engine stop lever released Operate engine stop lever Undulating ground conditions Change direction of travel Engine will not Incorrect oil level Check oil level Blade worn Sharpen blade turn over Uneven cut Obstruction under deck Remove obstruction... -
Page 25: Warranty
(Refer to the Engine Manual for the “Engine Warranty Statement”). To qualify for the 2 year warranty, you must have the machine serviced by a Hayter Authorised Service Dealer* within 12 months of the date of purchase. Please note that these services will be charged at a rate agreed between you and the Dealer. -
Page 26: Eu Privacy Statement
To do so, please contact us by email at legal@toro.com. If you have concerns about the way in which Hayter Ltd. has handled your information, we encourage you to raise this directly with us. Please note that European residents have the right to complain to your... -
Page 27: Notes
NOTES NOTES... - Page 28 Hayter Limited Spellbrook, Bishop’s Stortford, Herts CM23 4BU England Customer Care Helpline: 0800 616 298 www.hayter.co.uk...