Adjusting the Cutting
Height
WARNING
Adjusting the cutting height may bring you
into contact with the moving blade, causing
serious injury.
• Shut off the engine and wait for all moving
parts to stop.
• Do not put your fingers under the housing
when adjusting the cutting height.
There are 7 cutting-height settings from 25 to 70 mm.
Adjust the cutting height as desired. Set the front
wheels to the same height as the rear wheels.
To adjust the cutting height, disengage the lever
(Figure
12), raise or lower the machine, and then
engage the lever.
Figure 12
The cutting height positions are shown in
1. 70.0 mm
2. 62.5 mm
3. 55.0 mm
4. 47.5 mm
g198646
Figure
13.
9
Figure 13
5. 40.0 mm
6. 32.5 mm
7. 25.0 mm
g208642
Need help?
Do you have a question about the CODE610B and is the answer not in the manual?