Lubricating The Wheels - Hayter CODE610B Operator's Manual

Ensure that the blade is balanced. Use a screwdriver with a round shaft to support the blade through its
centre hole. Hold the blade horizontal and then release. A balanced blade will remain horizontal. Figure 29.
If the blade is not balanced the heavy end will rotate downwards. Sharpen the heavy end until the blade is
correctly balanced. Figure 30.

Lubricating the Wheels

Service Interval: Yearly or before storage
Apply a few drops of No. 2 lithium grease to the ball bearings on each of the wheels. Figure 31.
Figure 29
Figure 30
1
Figure 31
32
EN