Operation
Note: Determine the left and right sides of the machine from the normal operating position.
Before Operation
Before Operation Safety
General Safety
•
Always shut off the machine, wait for all moving parts to stop, and allow the machine to cool before
adjusting, servicing, cleaning, or storing it.
•
Become familiar with the safe operation of the equipment, operator controls, and safety signs.
•
Check that all guards and safety devices, such as deflectors and/or grass catcher, are in place and
functioning properly.
•
Always inspect the machine to ensure that the blades and blade bolts are not worn or damaged.
•
Inspect the area where you will use the machine and remove all objects that could interfere with the
operation of the machine or that the machine could throw.
•
Contact with the moving blade will cause serious injury. Do not put your fingers under the housing
when adjusting the cutting height.
Fuel Safety
•
Fuel is extremely flammable and highly explosive. A fire or explosion from fuel can burn you and
others and can damage property.
-
To prevent a static charge from igniting the fuel, place the container and/or machine directly on
the ground before filling, not in a vehicle or on an object.
-
Fill the fuel tank outdoors, in an open area, when the engine is cold. Wipe up any fuel that spills.
-
Do not handle fuel when smoking or around an open flame or sparks.
-
Do not remove the fuel cap or add fuel to the tank while the engine is running or hot.
-
If you spill fuel, do not attempt to start the engine. Avoid creating a source of ignition until the fuel
vapours have dissipated.
-
Store fuel in an approved container and keep it out of the reach of children.
•
Fuel is harmful or fatal if swallowed. Long-term exposure to vapours can cause serious injury and
illness.
-
Avoid prolonged breathing of vapours.
-
Keep your hands and face away from the nozzle and the fuel-tank opening.
-
Keep fuel away from your eyes and skin.
15
EN
Need help?
Do you have a question about the CODE610B and is the answer not in the manual?
Questions and answers