Folding The Handle - Hayter CODE610B Operator's Manual

7. Start the engine and run it until the clippings no longer come out from under the machine.
8. Shut off the engine.
9. Shut off the water and disconnect the garden hose from the machine.
10. Start the engine and run it for a few minutes to dry the underside of the machine to prevent it from
rusting.
11. Allow the engine to cool before storing the machine in an enclosed area.

Folding the Handle

Warning: Folding or unfolding the handle improperly can damage the cables, causing an unsafe operating
condition.
• Do not damage the cables when folding or unfolding the handle.
• If a cable is damaged, contact an Authorised Service Dealer.
1. Loosen the 2 handle knobs . Figure 20A.
2. Fold the handle by rotating it forward. Figure 20B.
A
B
Figure 20
25
EN