Summary of Contents for Hayter Harrier 56 Autodrive VS
Page 1
Harrier 56 Autodrive VS CODE574A OPERATOR MANUAL Original Version (EN) From Serial Number: 404000000 and Up Issued: 04/03/2019 Part number: 3431-259 Rev A...
CONTENTS Introduction Before Operation continued Non Grassed Areas Safety 6 - 9 Controls General Safety Before Mowing Safety Alert Symbol During Operation 15 - 16 Before Operation Safety 6 - 7 Starting - General Safety Forward Travel - Fuel Safety Shutting off the Engine During Operation Safety 7 - 8...
Page 4
CONTENTS Maintenance continued Carburettor Adjustments Blade Brake Test Lubrication Storage Storage Safety Preparing the Mower for Storage Storage Removing the Mower from Storage Trouble Shooting Warranty EU Privacy Statement Notes...
This mower is designed solely for use in a domestic grass cutting environment. Use in any other way is considered as contrary to the intended use. Hayter Limited reserves the right to amend product specifi cations without prior notifi cation.
SAFETY - Shut off the engine and wait for all moving parts General Safety personal injury or death. to stop. This mower has been designed in accordance with EN You can fi nd additional safety information where - Do not put your fi ngers under the housing when ISO 5395-2:2017.
3 seconds. If not, stop using your mower • Do not handle fuel when smoking or around an immediately and contact a Hayter Authorised • Use accessories and attachments approved by open fl ame or sparks. Service Dealer.
• To ensure optimum performance and continued embankments. safety certifi cation of the mower, use only genuine Hayter replacement parts and accessories. After Operation Safety - General • Replacement parts and accessories made by other manufacturers could be dangerous, and such use Safety could void the product warranty.
Please ensure all Safety Decals are secured on the mower before using the product. If any of the decals are missing or not secure, do not use the mower, contact your local Authorised Hayter Service Dealer for replacements. WARNING: Improper maintenance, use of non-conforming spare parts, or the removal or modifi cation of the safety decals may cause death or serious injury.
PRODUCT OVERVIEW PRODUCT SPECIFICATION 574A Code Model Harrier 56 Autodrive VS Weight (Net) 51.6 kg Length 1574 mm Width 585 mm 1043 mm Height Width of Cut 560 mm Height of Cut 13 - 60 mm Engine Manufacturer Hayter® Engine Type...
The engine must be fi lled with handle. the correct grade of oil and fuel before starting the Delivery Checklist • If a cable is damaged, contact a Hayter Authorised engine. Service Dealer. Check that the following items have been supplied correctly.
SETUP Engine Detail Read the oil level on the dipstick. • If the oil level on the dipstick is too low, NOTE: Disconnect the spark plug lead before carefully pour a small amount of oil into the oil- performing any maintenance procedures. fi...
Fuel stabiliser and engine oil are both available to acceptable. Ethanol and MTBE are not the same. Fuel purchase from your Authorised Hayter Service Dealer. IMPORTANT: If the oil level in the engine is too low or with 15%ethanol (E15) by volume is not approved for...
BEFORE OPERATION Adjusting the Cutting Height Non Grassed Areas mower blade could become dangerous projectiles. Inspect the area for hidden obstructions which when WARNING: Adjusting the cutting height may bring When moving the mower across non-grassed areas, contacted by the blade could risk health and safety or you into contact with the moving blade, causing stop the engine and set the mower to the maximum result in damage to the mower.
If the engine does not start after repeated attempts, Shutting off the Engine contact your local Hayter Authorised Service Dealer. To make a tight turn release the Sens-a-Speed® lever, apply downward pressure on the handle to raise the IMPORTANT: When you release the engine stop and Firmly hold the engine stop lever against the handle.
Allow through the grass bag. To empty the grass bag, Authorised Hayter Service Dealer. the grass clippings to dry out and then mow the area pour out the grass clippings and shake the grass bag at the maximum height of cut setting with the grass vigorously to clean the airways.
WARNING: Improper maintenance, use of non (Refer fi g.22) conforming replacement components, or the removal If a cable is damaged, contact a Hayter Authorised or modifi cation of the deck may cause death or Service Dealer. 6. Turn the water on.
MAINTENANCE SCHEDULE Note: Determine the left and right sides of the mower from the normal operating position. Recommended Maintenance Schedule Maintenance Service Interval Maintenance Procedure Before each use or daily Check the engine-oil level. Clean grass clippings and dirt from under the mower. Check the condition of guards and safety devices.
MAINTENANCE Preparing for Maintenance solvents will dissolve the fi lter. 8. Install the cover (1). (Refer to fi g.24) IMPORTANT: Before tipping the mower to change 1. Press down on the latch tabs, on top of the air- the oil or replace the blade, allow the fuel tank to run fi...
MAINTENANCE Changing the Engine Oil 10. Insert the dipstick into the oil-fi ll tube, but do not Servicing the Spark Plug screw it in, then remove the dipstick. NOTE: Run the engine a few minutes to warm the oil Improper maintenance, use of non conforming 11.
If you are uncomfortable (Refer fi g. 28) performing this procedure or do not have a torque wrench, contact a Hayter Authorised Service Dealer. Blade Sharpening WARNING: The blade is sharp; contacting the blade A slightly worn blade may be re-sharpened. Both blade can result in serious personal injury.
50 mm from the handle. you release the engine stop lever, contact a Hayter or modifi cation of the rear defl ector may cause death Authorised Service Dealer.
STORAGE Storage Safety • Remove the spark plug, add 30 ml (1 fl oz) of Removing the Mower from Storage engine oil through the spark-plug hole, and pull the Always shut off the mower, wait for all moving engine start cord slowly several times to distribute •...
TROUBLE SHOOTING PROBLEM CAUSES CORRECTIVE ACTION PROBLEM CAUSES CORRECTIVE ACTION Engine stop lever released Operate engine stop lever Undulating ground conditions Change direction of travel Engine will not Incorrect oil level Check oil level Blade worn Sharpen blade turn over Uneven cut Obstruction under deck Remove obstruction...
Hayter Limited warrants to the original purchaser that this unit shall be free from defects in material and workmanship, under normal, residential use, for a period of fi ve years from the date of purchase or, if used commercially, for a period of 90 days from the date of purchase. To qualify for the 5 year warranty, you must have the mower serviced annually by an Authorised Hayter Service Dealer* within 12, 24, 36 and 48 months of the date of purchase.
To do so, please contact us by email at legal@toro.com. If you have concerns about the way in which Hayter Ltd. has handled your information, we encourage you to raise this directly with us. Please note that European residents have the right to complain to your...
Page 28
Hayter Limited Spellbrook, Bishop’s Stortford, Herts CM23 4BU England Customer Care Helpline: 0800 616 298 www.hayter.co.uk...