Download Print this page

Advertisement

Quick Links

Harrier 56 PRO Autodrive FS
CODE579A
OPERATOR MANUAL
Original Version (EN)
From Serial Number: 404000000 and Up
Issued: 26/02/2019
Part number: 3431-263 Rev A
CV

Advertisement

loading
Need help?

Need help?

Do you have a question about the Harrier 56 PRO Autodrive FS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Hayter Harrier 56 PRO Autodrive FS

  • Page 1 Harrier 56 PRO Autodrive FS CODE579A OPERATOR MANUAL Original Version (EN) From Serial Number: 404000000 and Up Issued: 26/02/2019 Part number: 3431-263 Rev A...
  • Page 3: Table Of Contents

    CONTENTS Introduction Before Operation continued Controls Safety 6 - 9 Before Mowing General Safety During Operation 15 - 17 Safety Alert Symbol Starting Before Operation Safety Forward Travel - General Safety Shutting off the Engine - Fuel Safety Parking During Operation Safety Turning - General Safety - Slope Safety...
  • Page 4 CONTENTS Maintenance continued Carburettor Adjustments Blade Brake Test Lubrication Storage Storage Safety Preparing the Mower for Storage Storage Removing the Mower from Storage Trouble Shooting Warranty EU Privacy Statement Notes...
  • Page 5: Introduction

    Hayter Limited have designed and tested this machine for reasonably safe service; however, failure to comply with the instructions in this manual may result in personal injury. Hayter Limited reserves the right to amend product specifi cations without prior notifi cation.
  • Page 6: Safety

    SAFETY General Safety personal injury or death. Before Operation Safety - Fuel Safety This mower has been designed in accordance with EN You can fi nd additional safety information where Fuel is extremely fl ammable and highly explosive. A ISO 5395-2:2017. needed throughout this manual.
  • Page 7: During Operation Safety

    3 seconds. If it doesn’t, stop using your mower immediately and contact a • Operate the engine only in well-ventilated areas. Hayter Authorised Service Dealer. Exhaust fumes contain carbon monoxide, which is lethal if inhaled. • Keep bystanders out of the operating area. Keep small children out of the operating area and under •...
  • Page 8: After Operation Safety

    Fuel is fl ammable and explosive, and can cause personal injury. Run the engine dry or remove the fuel with a hand pump; never siphon the fuel. • To ensure optimum performance and continued safety certifi cation of the mower, use only genuine Hayter replacement parts and accessories.
  • Page 9: Safety & Instructional Decals

    Please ensure all safety decals are secured on the mower before using the product. If any of the decals are missing or not secure, do not use the mower, contact your local Authorised Hayter Service Dealer for replacements. WARNING: Improper maintenance, use of non-conforming spare parts, or the removal or modifi cation of the safety decals may cause death or serious injury.
  • Page 10: Product Overview

    PRODUCT OVERVIEW PRODUCT SPECIFICATION 579A Code Model Harrier 56 PRO Autodrive FS Weight (Net) 58.5 kg Length 1594 mm Width 585 mm 1043 mm Height Width of Cut 560 mm Height of Cut 13 - 60 mm Engine Manufacturer Briggs & Stratton...
  • Page 11: Setup

    The engine must be fi lled with handle. the correct grade of oil and fuel before starting the Delivery Checklist • If a cable is damaged, contact a Hayter Authorised engine. Service Dealer. Check that the following items have been supplied correctly.
  • Page 12: Engine Detail

    SETUP that the oil level is at the top of the full indicator (2) Engine Detail on the dipstick. NOTE: Disconnect the spark plug lead before • If the oil level on the dipstick is too low, performing any maintenance procedures. carefully pour a small amount of oil into the oil fi...
  • Page 13: Before Operation

    fi ll above the bottom of the fuel Fuel stabiliser and engine oil are both available to tank neck. (Refer fi g.7) purchase from your Authorised Hayter Service Dealer. 111-9367 - Lawnmower Oil SAE 30 Hayter (Refer fi g.6) 111-9368 - Premium Fuel Treatment Hayter 3.
  • Page 14: Adjusting The Cutting Height

    BEFORE OPERATION Adjusting the Cutting Height Controls WARNING: The blade is sharp; contacting the blade WARNING: Improper maintenance, use of non- can result in serious personal injury. Shut off the conforming replacement components, or the removal engine and wait for all moving parts to stop before or modifi...
  • Page 15: During Operation

    If the engine does not start after repeated attempts, (Refer fi g.13) contact your local Hayter Authorised Service Dealer or go to briggsandstratton.com. Emergency stop: If the engine fails to stop, disconnect the spark plug lead (1).
  • Page 16: Engaging The Blade

    Hayter Authorised Service Dealer. bag fi tted. Refer to Adjusting the Cutting Height. Reduce the height of cut and mow the area again as Trim Side Cutting necessary until the required fi...
  • Page 17: Grass Bag

    Good grass collection depends on good air fl ow ALWAYS replace a damaged blade. Consult your through the grass bag. To empty the grass bag, Authorised Hayter Service Dealer. pour out the grass clippings and shake the grass bag vigorously to clean the airways.
  • Page 18: After Operation

    6. Turn the water on. If a cable is damaged, contact a Hayter Authorised serious injury. Service Dealer. Start the engine, engage the BBC and run it until...
  • Page 19: Maintenance Schedule

    MAINTENANCE SCHEDULE Note: Determine the left and right sides of the mower from the normal operating position. Recommended Maintenance Schedule Maintenance Service Interval Maintenance Procedure Before each use or daily Check the engine-oil level. Check the air fi lter. Clean grass clippings and dirt from under the mower. Check the condition of guards and safety devices.
  • Page 20: Maintenance

    MAINTENANCE Preparing for Maintenance damage the fi lter and solvents will dissolve the fi lter. IMPORTANT: Before tipping the mower to change 1. Loosen the fasteners (1) at the top of the air fi lter the oil or replace the blade, allow the fuel tank to run cover (2).
  • Page 21: Changing The Engine Oil

    MAINTENANCE 9. Wait for the oil to settle in the engine. Servicing the Spark Plug Changing the Engine Oil 10. Wipe the dipstick clean with a clean cloth. NOTE: Run the engine a few minutes to warm the oil Improper maintenance, use of nonconforming 11.
  • Page 22: Remove & Replace The Blade

    If you are uncomfortable (Refer fi g. 30) performing this procedure or do not have a torque wrench, contact a Hayter Authorised Service Dealer. Blade Sharpening WARNING: The blade is sharp; contacting the blade A slightly worn blade may be re-sharpened. Both blade can result in serious personal injury.
  • Page 23: Clutch Cable Adjustment

    50 mm from the handle. you release the BBC control lever, contact a Hayter or modifi cation of the rear defl ector may cause death Authorised Service Dealer.
  • Page 24: Storage

    STORAGE Storage Safety • Remove the spark plug, add 30 ml (1 fl oz) of Removing the Mower from Storage engine oil through the spark-plug hole, and pull the Always shut off the mower, wait for all moving engine start cord slowly several times to distribute •...
  • Page 25: Trouble Shooting

    TROUBLE SHOOTING PROBLEM CAUSES CORRECTIVE ACTION PROBLEM CAUSES CORRECTIVE ACTION Engine stop lever released Operate engine stop lever Undulating ground conditions Change direction of travel Engine will not Incorrect oil level Check oil level Blade worn Sharpen blade turn over Uneven cut Obstruction under deck Remove obstruction...
  • Page 26: Warranty

    The manufacturers of the engine furnish their own warranty and services are provided through their authorised network (Refer to the Engine Manual for the “Engine Warranty Statement”). To qualify for the 2 year warranty, you must have the machine serviced by a Hayter Authorised Service Dealer* within 12 months of the date of purchase. Please note that these services will be charged at a rate agreed between you and the Dealer.
  • Page 27: Eu Privacy Statement

    To do so, please contact us by email at legal@toro.com. If you have concerns about the way in which Hayter Ltd. has handled your information, we encourage you to raise this directly with us. Please note that European residents have the right to complain to your...
  • Page 28 Hayter Limited Spellbrook, Bishop’s Stortford, Herts CM23 4BU England Customer Care Helpline: 0800 616 298 www.hayter.co.uk...

This manual is also suitable for:

Code579a