3-4.2 Verifying 8-Channel Audio - SOLTEK SL-K8T-939FL Manual

SL-K8T-939FL

3-4.2 Verifying 8-channel Audio

After installation of AC'97 8-channel Codec, you must configure the 7.1
Speaker connection to enable the 8-channel audio.
1. Connect your on-board Audio Connector to your 8-channel speakers
as depicted in the figure below:
Blue Connector
Line In
Light Green Connector
Front Speaker
Pink Connector
Microphone In
2. After Connection is done, start your Windows system and double
click the Sound manager icon to enter 8-channel configuration:
Back Panel Audio Connectors
Chapter 3 Software Setup
Black Connector
To Rear Speaker Out
Pink Connector
Center/ Subwoofer
Speaker Out
Gray Connector
to Side Speaker
41
Sound Effect
Manager icon on
Windows XP