Replacing The Maintenance Tank - Epson Stylus Pro 7450 User Manual

Hide thumbs Also See for Stylus Pro 7450:
Table of Contents

Advertisement

Replacing the Maintenance Tank

If the maintenance tank icon tells that the maintenance tank is full
or near full on the LCD panel, replace the maintenance tank.
To check the product code of the Maintenance Tank, see
"Consumable Products" on page 363.
To replace the maintenance tank, follow the steps below.
1. Open the package of a new maintenance tank.
2. Put your hand on the handle on the side of the printer, then
gently pull the maintenance tank outward.
Note:
EPSON Stylus Pro 9880/9880C/9450 has two maintenance tanks.
Make sure which maintenance tank is needed to be replaced with the
message on the LCD panel.
3. Put the used maintenance tank in the plastic bag provided.
Note:
Do not tilt the used maintenance tank until after it is sealed in the
plastic bag.
4. Insert the new maintenance tank into the place.
Maintenance and Transportation
260

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stylus pro 7450

Table of Contents