[SENSe:]FREQuency:APERture?
Parameters
Comments
[SENSe:]FUNCtion:CONDition
Parameters
Comments
Usage
Chapter 6
[SENSe:]FREQuency:APERture? <ch_list> returns the frequency counting gate
time.
Parameter
Parameter
Name
Type
channel
string
•
If the channels specified are on an SCP that doesn't support this function, an error
will be generated. See your SCP's User's Manual for its capabilities.
•
Related Commands: SENSe:FREQuency:APERture
•
Returned Value: returns numeric gate time in seconds, The type is float32.
[SENSe:]FUNCtion:CONDition <ch_list> sets the SENSe function to input the
digital state for channels in <ch_list>. Also configures digital SCP channels as
inputs (this is the *RST condition for all digital I/O channels).
Parameter
Parameter
Name
Type
ch_list
string
•
The HP E1533 SCP senses 8 digital bits on each channel specified by this
command. The HP E1534 SCP senses 1 digital bit on each channel specified by
this command.
•
If the channels specified are not on a digital SCP, an error will be generated.
•
Use the INPut:POLarity command to set input logical sense.
•
Related Commands: INPut:POLarity
•
*RST Condition: SENS:FUNC:COND and INP:POL NORM for all digital SCP
channels.
To set first four channels of a HP E1534 in SCP position 6, and second 8-bits of
HP E1533 at SCP position 7 to digital inputs send:
SENS:FUNC:COND (@148:151,156)
Range of
Values
132 - 163
Range of
Values
132 - 163
HP E1419 Command Reference 271
[SENSe]
Default
Units
none
Default
Units
none