Input; Input:debounce:time; Input:debounce:time <Time>,(@<Ch_List>); Input:polarity Normal | Inverted,(@<Ch_List>) - HP E1419A User Manual

Subsystem Syntax

INPut:DEBounce:TIME

Parameters
Comments
Chapter 6
The INPut subsystem controls configuration of programmable input Signal
Conditioning Plug-Ons (SCPs).

INPut

:DEBounce
:TIME <time>,(@<ch_list>)
:FILTer
[:LPASs]
:FREQuency <cutoff_freq>,(@<ch_list>)
:FREQuency? (@<channel>)
[:STATe] 1 | 0 | ON | OFF,(@<channel>)
[:STATe]? (@<channel>)
:GAIN <chan_gain>,(@<ch_list>)
:GAIN? (@<channel>)
:LOW <wvolt_type>,(@<ch_list>)
:LOW? (@<channel>)
:POLarity NORMal | INVerted,(@<ch_list>)
:POLarity? (@<channel>)
:THReshold
LEVel? (@<channel>)
INPut:DEBounce:TIME <time>,(@<ch_list>) sets the debounce time on the
specified digital input channels.
Parameter Parameter
Name Type
time numeric (float32)
(string)
ch_list channel list (string)
•
For a description of the debounce function see "Debounce Function" in the
HP E1536 SCP manual. The HP E1536A has two debounce timers. One for the
lower four channels, and one for the upper four channels. To set the debounce
timers use the command:
INPut:DEBounce:TIME <time>,(@<ch_list>)
Range of
Values
see comment |
MIN | MAX
132 - 163
HP E1419 Command Reference 237
INPut
Default
Units
Hz
none