Table of Contents
Advertisement
•
Never allow use by children or people unfamiliar with these instructions. Local regulations
may specify an age limit of the operator.
EN
•
This product is not intended for use by persons with reduced sensory or mental capacity
or lack of experience and knowledge - unless they are under the supervision of the person
responsible for their safety or if this person has instructed how use this product. The product
is not intended for use by children and persons with reduced mobility or poor physical
disposition. We strongly recommend to pregnant women to contact her doctor before use
of this product.
DE
•
Respect national/local regulations regarding working time (please, contact your local
authority).
SAFETY INSTRUCTIONS
•
Know your tool. Read owner's manual carefully. Learn its applications and
CS
limitations as well as the specific potential hazards related to this tool. Familiarise
yourself with the controls on the machine and how to use them.
•
Be careful at work, be concentrated on actual work, and use the common sense.
•
An inattention during work may result in loss of control over the machine.
•
Do not use this machine if you tired, ill or under the influence of alcohol, drugs or medication.
•
Do not put hands and feet near rotating parts or in the feeding chambers and discharge
opening.
SK
•
Do not overreach. Keep proper footing and balance at all times. This enables better control
of the tool in unexpected situations.
•
Remove any adjusting key or wrench before turning the machine on. A wrench or a key that
is left attached to a rotating part of the machine may result in personal injury.
•
Prolonged use of the machine may lead to disorders of blood circulation in hands caused by
vibration. These effects can be worsened by low ambient temperatures and/or by gripping
PL
the handgrips excessively tightly. Period of use you can extend with appropriate gloves or
regular breaks. Take frequent work breaks. Limit the amount of exposure per day.
B
WARNING!
All starting preventions and controls used in the operator's presence must be
HU
functional and properly and regularly checked. The mower's safety systems or
features must not be altered or disposed of.
PREPARATION
•
Examine the machine ensure it is in good condition, check all the screws, nuts and other
fasteners are properly secured and the screen is in place. Replace unreadable labels.
•
Keep all guards and deflectors in place and in good working condition.
•
Remove accumulated debris from muffler area and cylinder area. Inspect the muffler for
cracks, corrosion, or other damage.
•
Check the machine before an each use to determine whether the working tools are not
worn or damaged. Replace worn or damaged parts.
WORK AREA
•
Do not operate in explosive atmospheres, such as in the presence of flammable liquids,
gases, or dust. Product create sparks which may ignite the dust or fume.
20 / 48
Advertisement
Table of Contents
