Safety Instructions; Preparation - hecht 5169 Translation Of Original Instructions For Use

SAFETY INSTRUCTIONS

EN
• Know your tool. Read owner's manual carefully. Learn its applications and
limitations as well as the specific potential hazards related to this tool. Familiarise
yourself with the controls on the machine and how to use them.
• Be careful at work, be concentrated on actual work, and use the common sense. An
inattention during work may result in loss of control over the machine.
• Do not use this machine if you tired, ill or under the influence of alcohol, drugs or medication.
DE
• Do not put hands and feet near rotating parts.
• Do not overreach. Keep proper footing and balance at all times. This enables better control
of the tool in unexpected situations.
• Remove any adjusting key or wrench before turning the machine on.
• Do not leave the equipment unattended in the workplace.
CS
B
WARNING!
All starting preventions and controls used in the operator's presence must be
functional and properly and regularly checked. The safety systems or features must
not be altered or disposed of.
SK

PREPARATION

• Examine the machine ensure it is in good condition, check all the screws, nuts and other
fasteners are properly secured and the screen is in place. Replace unreadable labels.
• Remove accumulated debris from muffler area and cylinder area. Inspect the muffler for
cracks, corrosion, or other damage.
• Before using, always visually inspect to see that the blades, blade bolts and cutter assembly
PL
are not worn or damaged. Replace worn or damaged blades and bolts in sets to preserve
balance. Use only original spare parts.
• Do not work with damaged, incomplete device, or device adjusted without the consent of
the manufacturer. Never use the device with defective protective equipment. Before use,
check device condition. Never use the machine with damaged guards, or without the safety
protective devices in place.
HU
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control. Property maintained lawn mower with
sharp and unused blades ensure clean cut and it will not get clogged.
• On multi-bladed machines, remember that the rotation of one blade can cause other blades
to rotate.
C All drivers should seek and acquire expertise and practical experience aimed at
concentrating, operating and caring for mobile machinery.
• Avoid various terrain irregularities (potholes, depressions, piles, mole hills) and other hidden
dangers that could lead to loss of control.
Main reasons for loss of control:
- insufficient wheel grip,
- failure to maintain a safe speed
26 / 68