Safe Operation Of The Cmm; Operator Requirements; Defining A Competent Specialist - Zeiss CONTURA Operating Instructions Manual

Safe operation of the CMM

Safe operation of the CMM

2-6

Operator requirements

The operator must ensure the following:
– The installation site requirements must be met.
– The operator has been properly instructed regarding handling and
operation of the CMM.
– The operator has received the operating instructions for working
with the CMM. The operating instructions should be suitable for all
local operating conditions and should be available in the language
spoken by the operating personnel.
The operating instructions must always be available within easy
reach of the CMM.
– The operator must know and follow the safety instructions.
– Only competent spcialists may perform maintenance work and work
on electrical equipment.

Defining a competent specialist

A competent specialist is a person who reliably performs the required
work and who is able to recognize and avoid possible risks.
Performing a task is subject to the following conditions:
– The competent specialist has been authorized by the person respon-
sible for the safety of the coordinate measuring machine to perform
the required tasks.
– The competent specialist must have relevant training and experience.
– The competent specialist must have been instructed in the use of the
corresponding CMM.
– The competent specialist must be familiar with the relevant stan-
dards, regulations, accident prevention regulations and present oper-
ating conditions.
Work to be carried out by a competent specialist
– CMM installation.
– Maintenance work on the CMM.
– Work on the electrical equipment, for example controller.
– Preparation of the measurement: Workpiece setting, creation of
measurement plans and automatic measuring runs.
61211-1310402 CONTURA