Ce Marking; Standards And Regulations - Zeiss CONTURA Operating Instructions Manual

CE marking

EC declaration of conformity as defined by Machinery
Directive 2006/42/EC Annex II, No. 1A
We hereby declare that by its design and construction and version we
placed on the market, the machinery named below complies with the
requirements set out in the EC Machinery Directive 2006/42/EC and in
the additional EU directives listed below.
If modifications are made to the machinery without our prior approval,
this declaration will no longer be valid.
Designation of the ma-
chine:
CMM type:
Additional EU directives:
Applied harmonized stan-
dards, in particular:
The product bears the CE marking on its type plate.

Standards and regulations

The CMM has been designed, manufactured and tested according to
the following standards and regulations:
Regulations
– DGUV regulation 3:
Accident prevention regulations - electrical systems and equipment.
Standards
– EN (IEC) 61010-1:
Safety requirements for electrical equipment for measurement, con-
trol, and laboratory use.
– GB 4793.1:
Safety requirements for electrical equipment for measurement, con-
trol and laboratory use.
61211-1310402
General specifications
Coordinate measuring machine
CONTURA
– EMC Directive (2014/30/EU)
– RoHS Directive (2011/65/EU)
– EN 60204-1
– EN 61326-1 Table 2, Class A
– EN 61010-1
– EN ISO 12100
– EN 63000
CONTURA
1-3