Zeiss CONTURA Operating Instructions Manual page 141

– If an adapter plate is not being used, store it in a clean, dust-free
place, e.g. in a cabinet or drawer.
Cleaning:
Wipe off the adapter plate with a dry or damp cloth.
– Clean it with a mild cleaning agent.
– Dry it to prevent oxidation of its contacts.
NOTE
Ensure that there is no cleaning agent residue. This could impair the
function of the adapter plate.
Probe
The adapter plate and the adapter plate receptacle of the probe must be
protected against dirt.
– Place a protective cap on the adapter plate receptacle of the probe
when there is no stylus system in the adapter plate receptacle or the
probe is not in use.
– Store the probe in a clean, dust-free place, e.g. in a cabinet or
drawer.
Cleaning the probe:
Wipe the probe with a dry or damp cloth.
If the adapter plate receptacle is dirty:
1. Clean the adapter plate receptacle with a mild cleaning agent.
2. Dry the adapter plate receptacle.
NOTE
Make sure that the adapter plate receptacle is free from cleaning agent
residues. This could impair the function of the adapter plate receptacle.
ViScan
The light and lens must be free from contamination and streaks.
– Clean the glass surfaces with a dry, lint-free cloth or a brush.
DotScan
The light and lens must be free from contamination and streaks.
– Clean the glass surfaces with a dry, lint-free cloth or a brush.
LineScan
The laser beam outlet window on the probe must be free from dirt parti-
cles and smears.
61211-1310402 CONTURA
Care
9-11