Zeiss CONTURA Operating Instructions Manual page 79

Preparations for start-up
2 Inform the ZEISS service division.
Housing covers
The CMM may only be operated if all CMM housing covers are
mounted.
– Mount all housing covers before taking further measures.
Cable for power supply
The cable must be in perfect condition. It must not be bent nor dam-
aged.
– Ensure that no heavy objects are lying on the cable.
Compressed air supply
The compressed air lines and connections must be in perfect condition.
The compressed air line must not be damaged or bent. Furthermore, no
heavy objects may lie on the line. Check whether the following points
apply:
– Make sure that the hoses are in perfect condition.
– Ensure that no heavy objects are lying on the hose.
– Make sure that it is connected correctly to the supply line and the
CMM.
Changer rack
– Has the changer rack been installed correctly?
– Is a stylus system change possible without collision?
6-11
61211-1310402 CONTURA