Procedure - Zeiss CONTURA Operating Instructions Manual

Crane interlock
Heavy workpieces
100
Size 12/24/Z

Procedure

Putting the workpiece down on the measuring table
Workpieces can be set down on the measuring table either manually or
by means of a lifting device.
Activate the »crane interlock« when using a lifting device to set down
workpieces on the measuring table. The crane interlock is an option
which requires additional hardware and software.
Heavy workpieces have a hard impact if they are lowered onto the mea-
suring table too quickly.
1 Lower heavy workpieces at a maximum speed of 2 mm/s.
61211-1310402
Setting up the workpiece
800
CONTURA
6-25