Nortel Quality Monitoring User Manual page 44

Server software architecture
#-------------------------------------------------------------------------
# Section :
# :
# Keys :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
#-------------------------------------------------------------------------
[Genesys]
ServerName1=default
ApplicationName="Monitor App"
ApplicationPassword=
Debug=0
Detail=0
#-------------------------------------------------------------------------
# Section :
# :
# Keys :
# :
# :
# :
# :
#
# :
#
# :
#
# :
#
#-------------------------------------------------------------------------
[GeoTel]
ServerSideA=
PortSideA=
ServerSideB=
PortSideB=
DataCapture=
Detail=1
Debug=1
HeartBeat=30
44
Genesys
ServerName1
ApplicationName
ApplicationPassword
MaxResponseTime
Debug
Detail
GeoTel
ServerSideA
PortSideA
ServerSideB
PortSideB
DataCapture
Detail
Debug
HeartBeat
name of section in tserver.cfg
pertaining to the TServer
Max. time (sec.) to wait for
a response from Genesys. Used by
Heartbeat Thread to keep the
connection alive. If not set or
set to 0, Heartbeat is disabled.
host name or IP address of Primary GeoTel
port number on the Primary GeoTel
host name or IP address of Backup GeoTel
port number on the Backup GeoTel
turn on to capture dialer data to
disk, for debug only
1 indicates to log call detail
messages to the screen
1 indicates to log call debug messages
to the screen
frequency in seconds the SIU will send a heartbeat
to the GeoTel to check connectivity
Standard 3.0
Nortel Quality Monitoring