Aux I/O Port Dc Inputs - Danaher Motion Standalone MMC Hardware Manual

Danaher Motion
4.6.2.3

Aux I/O Port DC Inputs

The Aux I/O Port provides 12 general purpose 24 Vdc inputs. The inputs are
configured as two groups of six. Each group can be configured as sourcing or sinking.
Connect the DCSS pin to COM for a sourcing configuration by connecting the DCSS
pin to either the COM pin on the Aux I/O Port or to the Common of an external supply.
Connect the DCSS pin to +24 Vdc for a sinking configuration by connecting the DCSS
pin to either the +24 Vdc pin on the Aux I/O Port or to the +24 Vdc of an external
supply. Both sinking and sourcing configurations, using the Aux I/O +24V and COM
pins, are shown in
All 12 inputs are available on the four axis MMC-A4, and 6 inputs are available on the
two axis MMM-A2.
For more information on DC input operation, refer to
Appendix
MMC AUX I/O Connector
Standalone MMC Hardware Manual
version 15.1
Figure 4-19.
A.
Figure 4-19: Aux I/O Port Inputs
8
+24V
31
DCSSA
32
DC IN 1
33
DC IN 2
34
DC IN 3
35
DC IN 4
36
DC IN 5
37
DC IN 6
11
COM
10
COM
38
DCSSB
39
DC IN 7
40
DC IN 8
41
DC IN 9
42
DC IN 10
43
DC IN 11
44
DC IN 12
9
+24V
Standalone MMC Control
Section A.2 on page 173 of
SINKING
INPUTS
SOURCING
INPUTS
81