Danaher Motion
Figure 4-2: Block I/O Breakout Box Dimensions
4.5.3
User Port
The 15-pin HD male D-sub User Port connector (labeled "USER PORT" on the front of
the Control) provides RS232 and RS485 serial communication between a serial
device and the Control
Pin descriptions are provided in
•
•
Pin assignments are provided in
•
The available Flying Lead cable is described in
The available RS-232 Exter HMI cable is described in
•
•
The available RS-485 Exter HMI cable is described in
Available Breakout Boxes and Cables are described in
•
•
Breakout Box dimensions are shown in
Standalone MMC Hardware Manual
version 15.1
1.750"
2.250"
Standalone MMC Control
3.000"
1
6
1.750"
Table 4-13
Table 4-14
Table 4-15.
Figure 4-3
5
9
Table 4-16.
Table 4-17.
Table
4-18.
47