Table of Contents
Advertisement
Standalone Digital MMC Control
Description
MMC User Port Breakout Box
MMC User Port to Breakout Box Cable
MMC User Port to Breakout Box Cable
MMC User Port to Breakout Box Cable
a. The Breakout Box for the User Port connector can be attached to the "USER
PORT" connector on the MMC Control. The pinouts on the terminal strip inter-
face provide a one-to-one transfer of the signals from the connector to the
respective pin(s) on the terminal block. The connector pins marked with the
"ground" symbol on the screw connector are connected to the "D" connector
shell for shield grounding purposes.
Figure 5-3: User Port Breakout Box Dimensions
5.5.3
PiCPro Port
The 6-pin circular DIN PiCPro Port connector (labeled "PiCPro" on the front of the
Control) provides serial communication for the PiCPro programming interface.
Pin descriptions for are provided in
•
•
Pin assignments are provided in
•
The available PiCPro Port to PC cable is described in
108
Table 5-12: User Port Breakout Box and Cables
1.750"
3.000"
2.250"
version 15.1
Length
N/A
.3 M (1 ft)
.6 M (2 ft)
.9 M (3 ft)
1
9
2.250"
Table 5-13
Table 5-14
Table 5-15
Standalone MMC Hardware Manual
Danaher Motion
a
Part Number
M.1016.2530
M.1016.2715
M.1016.2716
M.1016.2717
8
15
Advertisement
Table of Contents
