Table of Contents
Advertisement
Danaher Motion
A typical MMC 10Base T connection is shown below.
Figure 6-3: Ethernet - TCP/IP 10Base T Connections
MMC
Maximum segment length is 100 M (328 ft).
6.2.1
The Ethernet Port
The 10Base-T port uses a RJ-45 style 8-pin connector using 100 ohm unshielded
twisted pair category 3 or 5 cable (IEEE 802.3 section 14.4). The maximum length of
the twisted pair cable segment is 100 M (328 ft). NOTE: The connector is also suitable
for shielded cable and will ground the shield to the chassis.
•
Pin descriptions for are provided in
Pin assignments are provided in
•
•
The available Ethernet Port to Ethernet Device cables are described in
Standalone MMC Hardware Manual
version 15.1
ETHERNET
DIAG
GDLNK EO EI
2.
COL PREV
OUT IN
COM1
1.
OUT IN
COM2
Enable
Disable
REMOTE
PROGRAMMER
ACCESS
10 BaseT
COM1
COM2
Shielded 10Base T Twisted Pair
Hub
Node
Node
MMC Ethernet TCP/IP Option Module
Table 6-2
Table 6-3
Segment
Node
Table 6-4
121
Advertisement
Table of Contents
