Adding An Option Module To The Mmc Control - Danaher Motion Standalone MMC Hardware Manual

Installation, Operation, & Maintenance
.55"
(13.97 mm)
3.2

Adding an Option Module to the MMC Control

Several Option Modules are available to add functionality to the MMC system. These
modules are described in the later sections of this manual. The standard Standalone
MMC Control (MMC-A2, MMC-A4, and MMC-S8) accepts up to two MMC Option
Modules. The Standalone MMC Control Plus (MMC-A2 Plus and MMC-A4 Plus), as
18
Figure 3-1: MMC Mounting Dimensions
1.05" (26.67 mm)
MMC
1.00"
(25.4 mm)
2.10" (53.34 mm)
.500" (12.70 mm) clearance required
for Standalone Digital MMC Control
version 15.1
.218" (5.54 mm)
Note: Unit is 5.3"
(134.62 mm) deep.
Side Cover
.040" Thickness
Screw Head
.080" Thickness
NOTE: Add the side
cover and screw
head thicknesses to
the unit's dimensions
for total width.
.55" (13.97 mm)
Standalone MMC Hardware Manual
Danaher Motion