Danaher Motion
Figure 4-3: User Port Breakout Box Dimensions
4.5.4
General I/O Port
The 44-pin HD male D-sub General I/O Port connectors (labeled "GEN I/O" on the
front of the Control) provides connection between user I/O devices and the Control.
This port provides 16 source-only outputs (described in detail in
page
57), and 16 sink or source inputs (described in detail in
60).
•
Pin descriptions are provided in
Pin assignments are provided in
•
•
The available Flying Lead cable is described in
•
Available Breakout Boxes and Cables are described in
Breakout Box dimensions are shown in
•
Standalone MMC Hardware Manual
version 15.1
Standalone MMC Control
1.750"
3.000"
2.250"
Table 4-19
Table 4-20
Table 4-21.
Figure 4-4
1
8
9
15
2.250"
section 4.5.4.1 on
section 4.5.4.2 on page
Table
4-22.
53