Table of Contents
Advertisement
Standalone Digital MMC Control
Part Numbers:
.3 M (1.0 ft):
1 M (3.3 ft):
3 M (9.8 ft):
10 M (32.8 ft): M.1302.8301
30 M (98.4 ft): M.1302.8303
Cable type: 28 AWG, shielded, twisted pair, 8 conductor.
8-Pin RJ-45 Plug (to
Digital Link Port, face
Pin
1
2
3
6
4
5
7
8
Shell
5.5.6
User USB Port
The User USB Port connector (labeled "USER USB" on the front of the Control) is for
future use. Do not connect any cables or devices to this port.
5.5.7
PiCPro USB Port
The PiCPro USB Port connector (labeled "PiCPro USB" on the front of the Control) is
for future use. Do not connect any cables or devices to this port.
5.5.8
Power Connection
The Power connector (labeled "PWR" on the front of the Control) must be connected
to a user-supplied +24 VDC power supply to provide power to the Standalone Digital
MMC Control. This power supply also provides power to any attached MMC Option
114
Table 5-21: Digital Link Port to Digital Drive Cables
M.1302.8285
M.1302.8287
M.1302.8289
8-Pin RJ-45 Plug (to Digital
view)
1
8
Signal
Pin
Transmit Data +
1
Transmit Data -
2
Receive Data +
3
Receive Data -
6
None
4
None
5
None
7
None
8
Drain
Shell
version 15.1
.6 M (2.0 ft): M.1302.8286
2 M (6.6 ft): M.1302.8288
5 M (16.4 ft): M.1302.8300
15 M (49.2 ft): M.1302.8302
Drive, face view)
1
8
Signal
Receive Data +
Receive Data -
Transmit Data +
Transmit Data -
None
None
None
None
Drain
Standalone MMC Hardware Manual
Danaher Motion
Notes
Twisted
Pair
Twisted
Pair
Twisted
Pair
Twisted
Pair
Advertisement
Table of Contents
