Function Table; Setting The Function Table - AND GX-M Series Instruction Manual

11.Function Table

The function table reads or rewrites the parameters that are stored in the balance. These
parameters are maintained in non-volatile memory, even if the AC adapter is removed.
The function table menu consists of two layers. The first layer is the "Class" and the second layer
is the "Item".

11-1 Setting The Function Table

Display symbol and keys
Setting procedure
1. Press and hold the SAMPLE key (for 2 seconds) until ba5fnc of the function table is
displayed in the weighing mode, then release the key
2. Press the
SAMPLE
3. Press the
PRINT
4. Press the
SAMPLE
5. Press the RE-ZERO
6. To change another (multiple) item with the same class, repeat "4" and "5". To end the setting
change of the same class, proceed to "7".
7. If storing parameters of the selected class, press the PRINT key.
Then the next class is displayed.
If canceling the current operation, press the CAL key. Then the next class is displayed.
8. When specifying parameters for another class, proceed to "2".
When finishing the setting, press the CAL key twice to return to weighing mode.
The symbol " " shows effective parameter.
When pressing and holding the key (for 2 seconds) in the weighing mode, the
balance enters the function table mode.
The key to select the class or item in the function table mode.
The key to change the parameter.
The key to change the parameter.
When a class is displayed, moves to an item in the class.
When an item is displayed, stores the new parameter and displays the next
class.
When an item is displayed, cancels the new parameter and displays the next
class.
When a class is displayed, exits the function table mode and returns to the
weighing mode.
key to select a class.
key to enter the class
key to select a item.
key to select a parameter for the selected item.
47