How To Set Up A Multi Fiber Test - Agilent Technologies E6000C User Manual

6 Sample Sessions: Other Mini-OTDR Modes
N O TE
Multi Fiber Test mode
152
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
9 Start a new trace by pressing the R
new trace is made with the settings that you have
previously saved.
For more details about the facilities available in
EasyMode, see "EasyMode" on page 62.

How to set up a Multi Fiber Test

Multi Fiber Test Mode allows you to measure and save
many traces on different fibers with up to four different
measurement setups per fiber.
You can save a setup as a setting (*.SET), template
(*.TPL), or Trace (*.SOR) file, then measure a series of
fibers with these presaved parameters.
For details on how to save a file, see "How to Save the
Measurement" on page 104, or "How to Save a Template"
on page 150.
How to Navigate within the Multi Fiber Test
Config page
1 Select Multi Fiber Test from the Applications screen.
You see the Mutifiber Test Configuration screen (Figure
57). The page that you see is the one visited last in this
Configuration screen.
E6000C Mini-OTDR User's Guide, E0302
How to set up a Multi Fiber Test
/S key. The
UN TOP