Redundant Configuration - Installing The Sc Software - Nortel Media Gateway 3500 Installation, Operation And Maintenance Manual

~> dir
sc_software.tar.gz.gz
3. Use the ftp command to access the sun system on the SC board. Enter the default
host name and IP address of the SC board provided by Nortel.
~> ftp <sc default IP address>
Connected to sc.
220 sc1 FTP server (SunOS 5.8) ready.
Name : root
331 Password required for root.
Password: root
230 User root logged in.
ftp> ascii
200 Type set to A.
ftp> put sc_install.pl
200 PORT command successful.
150 ASCII data connection for sc_install.pl
226 Transfer complete.
42477 bytes sent in 0.0082 seconds
ftp> bin
200 Type set to I.
ftp> put sc_software.tar.gz
200 PORT command successful.
150 Binary data connection for sc_software.tar.gz
226 Transfer complete.
46615040 bytes sent in 5.9 seconds
226 Transfer complete.
ftp> quit
14.2.5

Redundant Configuration - Installing the SC Software

To install the SC software, take these 12 steps:
1. Follow the installation scripts shown in the example below.
2. Log on using the default username: root and password: root.
3. Enter the tcsh command.
4. Enter the /install.pl command. The software installation & basic configuration menu
appears.
Note:
Installation, Operation, Maintenance Manual
The installation procedure rewrites the "~/.cshrc" file.
148
Media Gateway 3500
Document # LTRT-90704