Drive And Steer Control; Control Box - Standard - Haulotte Compact 8 Operator's Manual

Compact 8 - Compact 8CU - Compact 8W - Compact 10 (Compact 2747E) - Compact 10N (Compact 2632E) -
Compact 10N-1 - Compact 12 (Compact 3347E) - Compact 14 (Compact 3947E)
D
- Operation instructions
3.3 - D
RIVE AND STEER CONTROL

3.3.1 - Control box - Standard

Activate the controls and the Enable Switch simultaneously to perform the various movements.
N.B.-:-F
SELECTED
• OFF-Drive and steering functions are allowed at full height.
• ON if > 0,1 m (0.32 ft) - Drive function cut off and steering function active.
Command
1
Driving .
Front-axle
steering
1. When the platform is raised above 1,50 m(4 ft11 in), only micro-speed is possible
N.B.-:-T
82 4001182150
K - D
OR OREA ONLY RIVE RESTRICTION IN HIGH POSITION
, :
AS SHOWN BELOW

Drive and steer control

Push the movement joystick ( 108 ) forwards to move the machine forwards.
Push the movement joystick ( 108 ) forwards to reverse the machine.
Push the front-axle steering selector thumb switch ( 108 ) to the right to steer to the
right.
Push the front-axle steering selector thumb switch ( 108 ) to the left to steer to the
left.
HE RELEASE OF THE SELECTORS AND
Action
( )
OR JOYSTICKS CAUSES ALL MOVEMENT TO STOP
E 08.21
,
DEPENDING ON THE OPTION
USA / GB
.