Table of Contents
Advertisement
Operation and Maintenance
Caution !
In the event of a malfunction of the
safety measures, only specialised
personnel may carry out the
necessary adjustments.
Caution !
When the machine is at the limit of
its range, lateral movement is
prohibited (the range limit indicator
is lit). It is necessary to bring in the
telescope to recover the lateral
movement function.
3.2.3 - Control of the platform load
If the platform load exceeds the maximum authorised load, no movement
is not possible from the platform control unit. The overload indicator is an
alarm which alerts the operator.
To return to normal configuration, it is necessary either:
- lighten the platform to return to a permitted working load
- use the turret control unit, knowing that the movements will be slowed
down
3.2.4 - Slope Control
If the machine is located on a slope greater than the acceptable cant, the
tilt indicator on the platform lectern/panel and the alarm alert the operator
and any movement is cut. Nevertheless, the controls of the upper lectern/
control panel are not all cut.
Only movements making it possible to fold the machine are allowed in
order to recover from the transfer:
- retrieve the telescopic fly jib
- raise/lower the arm/fly jib to recover the horizontal position,
- lower the arm,
- lower the suspension platform until just below the horizontal.
Move the machine to a flat and horizontal surface.
.
NOTE :
When the machine is deployed, the slippage control box emits
an audible signal as long as the slope is higher than the ac-
ceptable threshold, indicating to the operator that it will be im-
possible to deploy the platform any further
3.2.5 - Lateral movement speed
The two lateral movement speeds are useable when the platform is
completely folded up. .
When the fly jib is raised, or the arm deployed, or the telescope extended,
or the suspension platform above the horizontal, only the micro speed is
possible for lateral movement.
3.2.6 - Hour meter
An hour meter indicates the operating life of the thermal engine.
3.2.7 - Equipment Operating Rules
• The lowering of the fly jib below the horizontal is authorised only when
the arm is raised at more than 60°.
• The arm cannot be lowered below 60° when the beam is below the
horizontal.
19
Advertisement
Table of Contents
