Maintenance Support - Haulotte Compact 8 Operator's Manual

Hide thumbs Also See for Compact 8:

Table of Contents

Compact 8 - Compact 8CU - Compact 8W - Compact 10 (Compact 2747E) - Compact 10N (Compact 2632E) -

Compact 10N-1 - Compact 12 (Compact 3347E) - Compact 14 (Compact 3947E)

- Familiarization

3.2 -

AINTENANCE SUPPORT

The maintenance stand must be in place before any maintenance operation is begun.

COMPACT 8 -

COMPACT 8CU -

COMPACT 8W

COMPACT 14 - COMPACT 3947E

The maintenance support (on both sides of the

machine) must be put in place before any maintenance

operations.

Placing the machine in maintenance configuration :

• Lift scissor arms to a sufficient height to tilt the stand.

• Unscrew, rotate and put the stand in the vertical position.

• The stand should remain in the vertical position.

• Lower the scissor arms.

• Scissor arm pivoting rod should rest on the V groove of the stand.

Putting in use position :

• To put back the machine into its normal operation, reverse the steps used above.

4001182150

COMPACT 10 -

COMPACT 2747E

E 08.21

COMPACT 10N -

COMPACT 2632E -

COMPACT 10N-1

COMPACT 12 -

COMPACT 3347E

USA / GB

Table of Contents

Show Quick Links

Table of Contents

Compact 8cu Compact 8w Compact 10 Compact 2747e Compact 10n Compact 2632e ... Show all