Page 1
Operator's manual For online reference and to download the manuals for your machines HAULOTTE®, go to : https://www.e.technical-information.com or, scan the QR Code below : Operator's manual Compact 8 (Compact 2032E) Compact 8W (Compact 2047E) Compact 10 (Compact 2747E) Compact 10N (Compact 2632E)
Page 7
Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N (C 2632E) - Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E) - Foreword Foreword You have just purchased a HAULOTTE® product and we would like to thank you for your business.
Page 13
Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N (C 2632E) - Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E) - Foreword • Using a machine on a slope : Do not drive the machine on slopes with gradients exceeding the authorised transversal and lateral limits for the machine.
Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N (C 2632E) - Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E) - Pre-operation inspection Pre-operation inspection 1 - Recommendations The owner, the site manager, the supervisor and the operator are all responsible to ensure the machine is fit for the work it is to perform;...
Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N (C 2632E) - Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E) - Operation instructions 5.4 - OWING In the event of a machine breakdown, the machine can be towed a short distance to load it onto a transport vehicle : •...
Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N (C 2632E) - Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E) - Operation instructions 5.4.2 - Automatic brake release (Option) To tow a broken-down machine, the brakes on the drive wheels can be released using a remote control allowing brake release to be activated remotely.
Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N (C 2632E) - Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E) - Operation instructions 5.5 - TORAGE The machine can be stored in a designated area when not in use. If it has been stored for longer than 3 months without use then a periodic inspection must be conducted.
Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N (C 2632E) - Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E) - Operation instructions 5.8 - IFTING OPERATION Before any lifting operation, it is necessary to take into account the following points : ONLY trained and authorized personnel should attempt to lift the machine.
Page 93
Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N (C 2632E) - Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E) - Operation instructions Slings and shackles installation The deformation that might appear is not permanent, the guardrail will return to its initial shape once the lifting operation is over and the slings are removed.
Page 96
Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N (C 2632E) - Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E) - Operation instructions How to charge the batteries ? : Before charging the batteries, switch the machine off.
Page 97
Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N (C 2632E) - Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E) - Operation instructions Do not disconnect any output leads or connectors between the batteries and the charger when the charger is on.
Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N (C 2632E) - Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E) - Maintenance 2 - Maintenance Schedule This section provides the necessary information needed to place the machine in safe operation. In accordance with the regulations that are currently applicable, this machine is deisgned to have a 10 year life span in normal usage conditions.
Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N (C 2632E) - Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E) - Maintenance 3 - Inspection program 3.1 - ENERAL PROGRAM The machine must be inspected on a regular basis at intervals of no less than once 1 per year.
Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N (C 2632E) - Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E) - Other information Other information 1 - Conditions of warranty Our warranty conditions and extension contracts are now available on the websites of our sales network : www.haulotte.com...
Need help?
Do you have a question about the Compact 8 and is the answer not in the manual?
Questions and answers