Page 1
For online reference and to download the manuals for your machines HAULOTTE®, go to : https://www.e.technical-information.com or, scan the QR Code below : Operator's manual Compact 8 - Compact 8CU - Compact 8W - Compact 10 (Compact 2747E) - Compact 10N (Compact 2632E) - Compact 10N-1 -...
Compact 8 - Compact 8CU - Compact 8W - Compact 10 (Compact 2747E) - Compact 10N (Compact 2632E) - Compact 10N-1 - Compact 12 (Compact 3347E) - Compact 14 (Compact 3947E) - Foreword Foreword You have just purchased a HAULOTTE® product and we would like to thank you for your business.
Page 13
Compact 8 - Compact 8CU - Compact 8W - Compact 10 (Compact 2747E) - Compact 10N (Compact 2632E) - Compact 10N-1 - Compact 12 (Compact 3347E) - Compact 14 (Compact 3947E) - Foreword Using a machine on a slope : Do not drive the machine on slopes with gradients exceeding the authorised transversal and lateral limits for the machine.
Compact 8 - Compact 8CU - Compact 8W - Compact 10 (Compact 2747E) - Compact 10N (Compact 2632E) - Compact 10N-1 - Compact 12 (Compact 3347E) - Compact 14 (Compact 3947E) - Foreword • Be aware of driving direction. • Check the driving direction with the help of the red or green arrow on the chassis relative to the red and green arrows on the platform control box.
Compact 8 - Compact 8CU - Compact 8W - Compact 10 (Compact 2747E) - Compact 10N (Compact 2632E) - Compact 10N-1 - Compact 12 (Compact 3347E) - Compact 14 (Compact 3947E) - Familiarization 3.2 - AINTENANCE SUPPORT The maintenance stand must be in place before any maintenance operation is begun.
Compact 8 - Compact 8CU - Compact 8W - Compact 10 (Compact 2747E) - Compact 10N (Compact 2632E) - Compact 10N-1 - Compact 12 (Compact 3347E) - Compact 14 (Compact 3947E) - Pre-operation inspection Pre-operation inspection 1 - Recommendations The owner, the site manager, the supervisor and the operator are all responsible to ensure the machine is fit for the work it is to perform;...
Compact 8 - Compact 8CU - Compact 8W - Compact 10 (Compact 2747E) - Compact 10N (Compact 2632E) - Compact 10N-1 - Compact 12 (Compact 3347E) - Compact 14 (Compact 3947E) - Pre-operation inspection 4.5 - LOPE WARNING DEVICE The tilt sensor alerts the operator when it reaches the maximum permissible tilt. The tilt limitation system activates if the heights defined in the "Transport position maximum height"...
Compact 8 - Compact 8CU - Compact 8W - Compact 10 (Compact 2747E) - Compact 10N (Compact 2632E) - Compact 10N-1 - Compact 12 (Compact 3347E) - Compact 14 (Compact 3947E) - Pre-operation inspection 4.8 - OTHOLE PROTECTION SYSTEM A system of protection against the holes on road is spread automatically when the platform is raised above values quoted in the table Section C 4.2 - Drive speed.
Compact 8 - Compact 8CU - Compact 8W - Compact 10 (Compact 2747E) - Compact 10N (Compact 2632E) - Compact 10N-1 - Compact 12 (Compact 3347E) - Compact 14 (Compact 3947E) - Operation instructions 5.4 - OWING In the event of a machine breakdown, the machine can be towed a short distance to load it onto a transport vehicle : •...
Compact 8 - Compact 8CU - Compact 8W - Compact 10 (Compact 2747E) - Compact 10N (Compact 2632E) - Compact 10N-1 - Compact 12 (Compact 3347E) - Compact 14 (Compact 3947E) - Operation instructions 5.4.2 - Automatic brake release (Option) To tow a broken-down machine, the brakes on the drive wheels can be released using a remote control allowing brake release to be activated remotely.
Compact 8 - Compact 8CU - Compact 8W - Compact 10 (Compact 2747E) - Compact 10N (Compact 2632E) - Compact 10N-1 - Compact 12 (Compact 3347E) - Compact 14 (Compact 3947E) - Operation instructions 5.5 - TORAGE The machine can be stored in a designated area when not in use. If it has been stored for longer than 3 months without use then a periodic inspection must be conducted.
Compact 8 - Compact 8CU - Compact 8W - Compact 10 (Compact 2747E) - Compact 10N (Compact 2632E) - Compact 10N-1 - Compact 12 (Compact 3347E) - Compact 14 (Compact 3947E) - Operation instructions 5.8 - IFTING OPERATION Before any lifting operation, it is necessary to take into account the following points : ONLY trained and authorized personnel should attempt to lift the machine.
Page 95
Compact 8 - Compact 8CU - Compact 8W - Compact 10 (Compact 2747E) - Compact 10N (Compact 2632E) - Compact 10N-1 - Compact 12 (Compact 3347E) - Compact 14 (Compact 3947E) - Operation instructions Slings and shackles installation Front view of the machine Side view of the machine Remove and place the platform control box on the platform floor.
Page 97
Compact 8 - Compact 8CU - Compact 8W - Compact 10 (Compact 2747E) - Compact 10N (Compact 2632E) - Compact 10N-1 - Compact 12 (Compact 3347E) - Compact 14 (Compact 3947E) - Operation instructions Slings and shackles installation The deformation that might appear is not permanent, the guardrail will return to its initial shape once the lifting operation is over and the slings are removed.
Page 100
Compact 8 - Compact 8CU - Compact 8W - Compact 10 (Compact 2747E) - Compact 10N (Compact 2632E) - Compact 10N-1 - Compact 12 (Compact 3347E) - Compact 14 (Compact 3947E) - Operation instructions How to charge the batteries ? : Before charging the batteries, switch the machine off.
Page 101
Compact 8 - Compact 8CU - Compact 8W - Compact 10 (Compact 2747E) - Compact 10N (Compact 2632E) - Compact 10N-1 - Compact 12 (Compact 3347E) - Compact 14 (Compact 3947E) - Operation instructions The CHARGING indicator LED remains lit continuously during the first stage of the charge cycle.
Page 102
Compact 8 - Compact 8CU - Compact 8W - Compact 10 (Compact 2747E) - Compact 10N (Compact 2632E) - Compact 10N-1 - Compact 12 (Compact 3347E) - Compact 14 (Compact 3947E) - Operation instructions Maintenance load : When the charger is connected to the mains for more than 48 h (hours), a new charging cycle starts up at the end of the previous charging cycle in order to offset self-discharge.
Compact 8 - Compact 8CU - Compact 8W - Compact 10 (Compact 2747E) - Compact 10N (Compact 2632E) - Compact 10N-1 - Compact 12 (Compact 3347E) - Compact 14 (Compact 3947E) - Maintenance 2 - Maintenance Schedule This section provides the necessary information needed to place the machine in safe operation. In accordance with the regulations that are currently applicable, this machine is deisgned to have a 10 year life span in normal usage conditions.
Compact 8 - Compact 8CU - Compact 8W - Compact 10 (Compact 2747E) - Compact 10N (Compact 2632E) - Compact 10N-1 - Compact 12 (Compact 3347E) - Compact 14 (Compact 3947E) - Maintenance 3 - Inspection program 3.1 - ENERAL PROGRAM The machine must be inspected on a regular basis at intervals of no less than once 1 per year.
Compact 8 - Compact 8CU - Compact 8W - Compact 10 (Compact 2747E) - Compact 10N (Compact 2632E) - Compact 10N-1 - Compact 12 (Compact 3347E) - Compact 14 (Compact 3947E) - Other information Other information 1 - Conditions of warranty Our warranty conditions and extension contracts are now available on the websites of our sales network : www.haulotte.com...
Need help?
Do you have a question about the Compact 8 and is the answer not in the manual?
Questions and answers