Services® immediately even if the malfunction does not involve material and/or bodily damage.. • HAULOTTE® must be informed in the event of an incident that either involves one of these products or has caused bodily injury or significant deterioration of property (personal property or the product);...
Electric scissor lifts 3 - Compliance We would like to remind you that HAULOTTE® complies with the provisions of any applicable directives applicable to this type of machine. HAULOTTE advises you that NO modifications carried out without the written permission of HAULOTTE®...
This manual must be kept on the machine (or in the cab in its storage case. The manual must be available to all operators and must be kept in good condition. Additional copies can be ordered from HAULOTTE Services®.
The potential dangers and any specific regulations are indicated around the product by labels and identification plates. The labels must be kept in good condition. Additional labels can be obtained from HAULOTTE Services®. Familiarize yourself with the labels and their respective color codes.
Section A 3.2.3-Risk of electrocution). • At ambient temperatures higher than 45 °C(113 °F) and lower than -15 °C(5 °F) . Consult HAULOTTE® if it is necessary to work outside this range. • In an explosive atmosphere. • During storms (risk of lightning).
• Never use the machine when the platform is cluttered. • Never increase the surface area of the platform by using floor extensions or accessories not authorized by HAULOTTE®. • Never leave the hydraulic cylinders fully extended or retracted before switching off the machine, or during an extended stop period.
Electric scissor lifts - Safety precautions 3.2 - POTENTIAL RISKS 3.2.1 - Risk of command system disturbance Risk of disrupted movement. Maintain clearance from high voltage lines or magnetic fields. 3.2.2 - Risk of falling When in the platform, respect the following instructions : •...
Electric scissor lifts - Safety precautions 3.2.3 - Risk of electrocution The machine is not electrically insulated and does not offer any insulation protection. The risks of electrocution are high in the following situations : • Close to live power lines, consider the movement of the machine and the sway of the electric power lines particularly in windy conditions.
Page 17
Electric scissor lifts - Safety precautions • Do not drive the machine on slopes or tilts beyond the design limits. Check the maximum value in the technical characteristics( Section G 1-Main characteristics). • Do not travel down slopes at high speed. •...
Electric scissor lifts - Safety precautions 3.2.5 - Risk of burns and explosion For any intervention on the power sources, wear glasses and protective clothes (acid spray). N.B.-:-Acid is neutralised with sodium bicarbonate and water. • Do not work in an explosive or flammable atmosphere (spark, flame, etc.). •...
The owner (or hirer) has the obligation to renew all manuals or labels that are either missing or in bad condition. Additional copies can be ordered from HAULOTTE Services®. The owner (or hirer) is responsible for applying the local regulations regarding operation of the machine.
If the machine is operated in a hostile environment or intensively, increase the frequency of maintenance. Inspections and maintenance Type of Reference Frequency Person-in-charge Intervenor intervention document Before each delivery Pre-delivery Qualified HAULOTTE of sold, hired or Owner (or hirer) Operator's manual inspection Services® technician resold equipment Before operation or Pre-operation when the operator Operator...
For any request for information, intervention or spare parts, specify the type and serial number of the machine. 2 - Main components COMPACT 8 (COMPACT 2032E) - COMPACT 8W (COMPACT 2247E) - COMPACT 10N (COMPACT 2632E) - COMPACT 10 (COMPACT 2747E) -COMPACT 12 (COMPACT 3347E) - COMPACT 14 (COMPACT 3947E) - Major Component Location Diagram...
Electric scissor lifts - Machine layout 3 - Safety devices 3.1 - SLIDING (OR SWINGING) INTERMEDIATE GUARDRAIL The illustrations in this paragraph do not necessarily correspond to the range of products designated in the manual. The platform is comprised of guardrails and a sliding mid-rail facilitating platform access. Do not restrain the sliding midrail to the guard rail.
Electric scissor lifts - Machine layout 3.3 - MAINTENANCE SUPPORT The illustrations in this paragraph do not necessarily correspond to the range of products designated in the manual. The maintenance support (on both sides of the machine) must be put in place before any maintenance operations.
CLASSIFICATION PLAN 4.1.1 - Red labels The red labels indicate a potentially fatal danger. Common labels 307P228390 a Specific labels COMPACT 8 (COMPACT 2032E) Specific labels COMPACT 8 (COMPACT 2032E) Single load (Option) C8CU 300 kg max (max) (max) 12,5 m/sec...
Page 27
Electric scissor lifts - Machine layout Specific labels COMPACT 8W (COMPACT 2247E) Specific labels COMPACT 10N (COMPACT 2632E) Specific labels COMPACT 10 (COMPACT 2747E) Specific labels COMPACT 12 (COMPACT 3347E) 2420332270 e10 12...
Page 28
Electric scissor lifts - Machine layout Specific labels COMPACT 14 (COMPACT 3947E) 350 kg max 0 m/sec Fmax.=1780 daN (0 km/h) Pmax.=28,7 daN/cm² 400 N (40 kg) 307P228090 11.80 m 2° 3° 307P228080b Specific labels OPTIMUM 6 (OPTIMUM 1530E) Specific labels OPTIMUM 8 (OPTIMUM 1930E) Specific labels COMPACT 10RTE (COMPACT 2668RTE) 2420332270 e10 12...
Page 29
Electric scissor lifts - Machine layout Specific labels COMPACT 12RTE (COMPACT 3368RTE) Specific labels COMPACT 10 / 12 RTE (COMPACT 2668 / 3368 RTE) - If outriggers option 2420332270 e10 12...
AND OPERATING PROPERLY. DO NOT operate this machine unless you have been properly trained as described in the HAULOTTE Operation and Safety Manual by a qualified person and authorized to operate this machine. Your training includes reading and understanding the safety, operating and maintenance instructions in manufacturer's manuals, knowing your employers work rules and applicable governmental regulations.
The other labels provide additional technical information. Common labels Specific COMPACT 8 (COMPACT 2032E) , COMPACT 8W (COMPACT 2247E) , COMPACT 10N (COMPACT 2632E) , COMPACT 10 (COMPACT 2747E) , COMPACT 12 (COMPACT 3347E) , COMPACT 14 (COMPACT 3947E) , OPTIMUM 6 (OPTIMUM 1530E) and OPTIMUM 8 (OPTIMUM 1930E) labels 307P227590 Capacità...
Page 33
Electric scissor lifts - Machine layout If outriggers option : Specific COMPACT 10RTE (COMPACT 2668RTE) and COMPACT 12RTE (COMPACT 3368RTE) labels Specific labels AS Specific labels AS : COMPACT - OPTIMUM - COMPACT RTE R16 Compact - Optimum R16 Compact RTE 7814 449 a 2420332270 e10 12...
Page 34
Electric scissor lifts - Machine layout Specific labels AS : Optimum 8-1 Specific labels AS : Compact 10N-1 Specific labels ANSI Minimum safe approach distance (M.S.A.D) to energized (exposed or insulated) power lines Minimum safe approach distance Voltage Range (Phase to phase) (Feet) (Meters) 0 to 300 V...
N.B.-:-COMPACT 10N-1 (NA) : Only for Australia. COMPACT - Label descriptions - Standards CE and AS Color Marking Description Quantity For COMPACT 8 (COMPACT 2032E) : 307P228400 For COMPACT 8 (COMPACT 2032E) Single load : 307P223960 For COMPACT 8W (COMPACT 2247E) : 307P230100...
Page 37
Electric scissor lifts - Machine layout Color Marking Description Quantity For COMPACT 8 (COMPACT 2032E) : 307P215530 For COMPACT 8 (COMPACT 2032E) Single load : 307P225640 For COMPACT 8W (COMPACT 2247E) : 307P215550 For COMPACT 10N (COMPACT 2632E) : Wheel load...
Page 38
- Machine layout Color Marking Description Quantity Other Identification plate 3078146180 For COMPACT 8 (COMPACT 2032E) and COMPACT 8 (COMPACT 2032E) Single load : 3078145120 For COMPACT 8W (COMPACT 2247E) : 3078145130 For COMPACT 10N (COMPACT 2632E) Other Machine name logo...
Page 39
Electric scissor lifts - Machine layout OPTIMUM - Locations - Standards CE and AS R1 - R2 - R8 N.B.-:-OPTIMUM 8-1 (NA) : Only for Australia. OPTIMUM - Label descriptions - Standards CE and AS Color Marking Description Quantity For OPTIMUM 6 (OPTIMUM 1530E) : 3078153660 Height of the floor and load For OPTIMUM 8 (OPTIMUM 1930E) :...
Page 40
3078146180 For OPTIMUM 6 (OPTIMUM 1530E) : 3078146720 Other Machine name logo For OPTIMUM 8 (OPTIMUM 1930E) and OPTIMUM 8-1 (NA) : 3078146730 Other Small format HAULOTTE® logo 307P217080 Other Read the operation manual 3078143680 Other Hydraulic oil 3078143520 Other...
Page 41
Electric scissor lifts - Machine layout COMPACT RTE - Locations - Standards CE and AS - J9 - J14 J6 - A5 COMPACT RTE - Label descriptions - Standards CE and AS Color Marking Description Quantity For COMPACT 10RTE (COMPACT 2668RTE) : 3078146300 Height of the floor and load For COMPACT 12RTE (COMPACT...
Page 42
Electric scissor lifts - Machine layout Color Marking Description Quantity For COMPACT 10RTE (COMPACT 2668RTE) : 3078153280 Maximum effort on the stabilizers For COMPACT 12RTE (COMPACT 3368RTE) : 3078153290 CE standard : 3078144670 Risk of crushed feet AS standard : 3078146700 Load strength on each slings For AS standard only : 3078144490 Do not travel down slopes at high...
Page 43
Marking Description Quantity For COMPACT 10RTE (COMPACT 2668RTE) : 3078148680 Other Machine name logo For COMPACT 12RTE (COMPACT 3368RTE) : 3078148690 Other Small format HAULOTTE® logo 307P217080 Other Read the operation manual 3078143680 Other Hydraulic oil 3078143520 Other Biodegradable oil...
Page 44
- A22 COMPACT - Label descriptions - Standards ANSI and CSA Color Marking Description Quantity For COMPACT 8 (COMPACT 2032E) : 3078146970 For COMPACT 8W (COMPACT 2247E) : 3078146990 For COMPACT 10N (COMPACT 2632E) : 3078151010 Height of the floor and load...
Page 45
Platform control box 3078151240 Other Ground control box 3078145060 Other Identification plate 307P218930 For COMPACT 8 (COMPACT 2032E) : 3078147040 For COMPACT 8W (COMPACT 2247E) : 3078147060 For COMPACT 10N (COMPACT 2632E) : 3078151050 Other Machine name logo For COMPACT 10 (COMPACT 2747E) :...
Page 46
Electric scissor lifts - Machine layout OPTIMUM - Locations - Standards ANSI and CSA R1 - R2 - R8 OPTIMUM - Label descriptions - Standards ANSI and CSA Color Marking Description Quantity For OPTIMUM 6 (OPTIMUM 1530E) : 3078148440 Height of the floor and load For OPTIMUM 8 (OPTIMUM 1930E) : 3078148450 Travel direction...
Page 47
Description Quantity For OPTIMUM 6 (OPTIMUM 1530E) : 3078148420 Other Machine name logo For OPTIMUM 8 (OPTIMUM 1930E) : 3078148430 Other Small format HAULOTTE® logo 307P217080 Other Read the operation manual 3078147290 Other Hydraulic oil 3078147140 Other Harness anchor point location...
Page 48
Electric scissor lifts - Machine layout COMPACT RTE - Locations - Standards ANSI and CSA A2 - A22 - J14 J6 - A5 COMPACT RTE - Label descriptions - Standards ANSI and CSA Color Marking Description Quantity For COMPACT 10RTE (COMPACT 2668RTE) : 3078148520 Height of the floor and load For COMPACT 12RTE (COMPACT...
Page 49
Identification plate 307P218930 For COMPACT 10RTE (COMPACT 2668RTE) : 307P219080 Other Machine name logo For COMPACT 12RTE (COMPACT 3368RTE) : 307P219090 Other Small format HAULOTTE® logo 307P217230 Other Read the operation manual 3078147290 Other Hydraulic oil 3078147140 Other Upper and lower oil level...
Page 50
Electric scissor lifts - Machine layout COMPACT 14 (COMPACT 3947E) - Locations - Russia and the Ukraine version 36 - 41 COMPACT 14 (COMPACT 3947E) - Label descriptions - Russia and the Ukraine version Color Marking Description Quantity Blue Height of the floor and load 4000015650 For Russia : 4000014360...
Page 51
Ground control box 3078145060 For Russia : 4000016130 Other Identification plate For Ukraine : 4000019640 Other Machine name logo 307P227250 Other Small format HAULOTTE® logo 307P217080 Other Hydraulic oil 3078143520 Other Yellow and black adhesive tape 2421808660 Other Tamper-proof labe...
Electric scissor lifts - Machine layout 5 - Control boxes N.B.-:-The functions are described for the entire range. Refer to the machine model to identify the controls and functions indicators. 5.1 - GROUND CONTROL BOX - EMERGENCY CONTROL PANEL General view Controls and indicators Marking Description...
Electric scissor lifts - Machine layout 5.2 - PLATFORM CONTROL BOX General view Controls and indicators Marking Description Function Tilt indicator Machine on excessive slope Overload indicator Platform overloaded Press in and hold (activated) : Maximum drive torque (on difficult or sloping ground) Differential lock selector Release (deactivated) : Standard torque Horn selector...
Page 55
Electric scissor lifts - Machine layout Marking Description Function Move forward : Forward drive or platform elevation Movement joystick Move backward : Reverse drive or platform lowering Press right side of button : Right-hand steering Front axle steering selector Press left side of button : Left-hand steering On : Machine switched on Power ON indicator-Fault indicator Flashing : Fault indicated...
Page 56
Electric scissor lifts - Machine layout If outriggers option - Compact 10/12 RTE (Compact 2668 / 3368 RTE) - General view If outriggers option - Compact 10/12 RTE (Compact 2668 / 3368 RTE) - Controls and indicators Marking Description Function Platform overload indicator Platform overload On : Machine switched on...
Page 57
Electric scissor lifts - Machine layout Marking Description Function Pressed down (activated) : Stabilizer extended and LED on Rear left stabilizer extension selector (continuously: stabilizer extended and set against the switch and indicator ground; rapid flashing: stabilizer extended but not yet set; slow flashing: stabilizer totally extended but not set) Pressed down (activated) : Stabilizer extended and LED on Rear right stabilizer extension selector...
Electric scissor lifts - Operating principle Operating principle 1 - Description Machine movements are powered by a hydraulic pump. The hydraulic pump is powered by an battery-powered electric motor. To protect the user and the machine, safety systems prevent the operation of the machine beyond its capacities.
OPTIMUM 6 (OPTIMUM 1530E) 1,50 4 ft 11 in OPTIMUM 8 (OPTIMUM 1930E) 1,60 5 ft 3 in COMPACT 8 (COMPACT 2032E) 1,60 5 ft 3 in COMPACT 8W (COMPACT 2247E) 1,75 5 ft 9 in COMPACT 10N (COMPACT 2632E)
Electric scissor lifts - Operating principle 2.3 - SPACE FOR OPERATING TEMPERATURE THERMOSTAT For Russia and the Ukraine only : Hydraulic energy to perform machine movements is provided by an electric motor driven hydraulic pump.The operating speed of the pump is governed by a speed regulator. If the temperature llimits are reached, an audible alarm alerts the operator.
Electric scissor lifts - Operating principle 2.7 - ON-BOARD CHARGER The on-board charger is used to charge the semi-drive batteries. Battery charging starts as soon as external power supply is connected. The ( 93 ) indicator indicates charge status : •...
Electric scissor lifts - Driving Driving 1 - Recommendations The manager of the company responsible for the commissioning of the machine must ensure that the machine is fit for the work it is to perform. i.e. that the machine is suitable to carry out the work in complete safety in compliance with this Operator Manual.
Page 66
Electric scissor lifts - Driving • Visual state of the machine : • Absence of leaks (battery acid, hydraulic oil, etc.). Absence of foreign objects on all surfaces. Call the staff in charge of the maintenance if necessary. • No missing or loose parts (bolts, nuts, connectors, cables, etc.). Refer to the "tightening torques" table quoted in the Maintenance Book.
Electric scissor lifts - Driving • State of the hydraulic unit and pump : • No leaks. • No missing or loose parts (bolts, nuts, connectors, cables, etc.). • Hydraulic oil filter. Refer to the Maintenance book. • State of the structure's parts : Arm, platform : •...
Electric scissor lifts - Driving 2.2 - FUNCTIONAL TESTS 2.2.1 - Safety features Features to be tested : • Operation of the upper and lower emergency stop buttons. • Operation of the tilt sensor. • Visual and audible alarms. • Platform load management system (Where fitted). For functional test procedures refer to ( Section E 3.1-Test procedure).
HAULOTTE Services® technicians are specially trained to carry out extensive repairs, interventions or adjustments on the safety systems or elements of HAULOTTE® machines, and carry genuine HAULOTTE spare parts and tools as required, and also provide fully documented reports on all work completed..
Electric scissor lifts - Driving 3 - Operation N.B.-:-The functions are described for the entire range. Refer to the machine model to identify the controls and functions indicators. Find all the function indicators and controls in Section C 5 - Control boxes 3.1 - TEST PROCEDURE 3.1.1 - Emergency stop switch- button function (cut out)
Electric scissor lifts - Driving For OPTIMUM 6 (OPTIMUM 1530E) and OPTIMUM 8 (OPTIMUM 1930E) only : The knob ( 1 ) located on the tilt label is used for the autotest. The autotest mode simulates a slope exceeding the authorized angle. An internal control is carried out.
(bip) is audible. • If this result is not obtained, the overload limitation system must be restored to working order. Please refer to the Maintenance book or contact HAULOTTE Services®. 3.1.5 - 8 m(26 ft3 in) drive cut-off (Floor height)
Electric scissor lifts - Driving 3.2 - OPERATION FROM GROUND POSITION Ground control box is an auxiliary to be used only in case of emergency. 3.2.1 - Machine start-up Pull the emergency stop button 144. Switch the machine on 72 or 92(Depending on the machine). Turn the key on the control box activation selector switch ( 72 ) to the right to energize the ground control box.
Electric scissor lifts - Driving 3.3 - OPERATIONS FROM THE PLATFORM 3.3.1 - Machine start-up Pull the emergency stop button 46. 3.3.2 - Machine shutdown Press the emergency stop button ( 46 ). 3.3.3 - Movement control Activate the controls and the 'Enable Switch' system simultaneously to perform the various movements. Platform control box controls (driving station) Control Action...
Page 75
Electric scissor lifts - Driving Control Action Set the movement selector ( 112 ) to for high speed (long distance driving, tarmac, concrete). Drive speed (minimum) Set the movement selector ( 112 ) to for slow driving (short distance, final approach). Set the movement selector ( 59 ) to for high speed (long If outriggers option :...
Page 76
Electric scissor lifts - Driving Control Action If outriggers option : Push the touch pads ( 99 ) until the rear left stabilizer is set against the Rear left stabilizer ground ( LED on). Push the touch pads ( 103 ) until the rear left extension/retraction stabilizer is totally retracted ( LED off).
Electric scissor lifts - Driving 3.3.4 - Other controls • Horn : Push the horn selector ( 43 ) to the right to sound the horn. The horn stops when the selector switch is released. • Differential lock : Press the differential blocking touch pads ( 35 ). N.B.-:-If outriggers option : •...
Page 78
Electric scissor lifts - Driving 2420332270 e10 12...
Electric scissor lifts - Special procedure Special procedure Find all the function indicators and controls in Section C 5 - Control boxes 1 - Emergency lowering 1.1 - PRINCIPLE N.B.-:-During emergency manoeuvres controlled from the ground with extension out, it is essential to ensure that there is no obstacle under the platform (wall, beam, electric line, etc).
Electric scissor lifts - Special procedure 2 - Towing In case of a machine failure, it is possible to tow it to load it onto a trailer. 2.1 - MANUAL BRAKE RELEASE To tow a broken-down machine, perform manual brake release. Perform these operations on flat, horizontal ground.
Electric scissor lifts - Special procedure 2.2 - AUTOMATIC BRAKE RELEASE (OPTION) To tow a broken down machine, the brakes on the drive wheels can be released using a remote control allowing brake release to be activated remotely. Perform these operations on flat, horizontal ground. Failing that, block the wheels to immobilize the machine.
Electric scissor lifts - Special procedure 3 - Loading and unloading 3.1 - PRINCIPLE 3.1.1 - Loading by ramp To avoid any risk of sliding during loading, ensure that : • The loading ramps can bear the load. • The loading ramps are correctly attached. •...
• Have stability tests carried out by a certified agency/competent person. • Ensure label compliance. HAULOTTE® has a continuous improvement policy in place for its product range ; Given this policy, The Company reserves the right to modify their product technical characteristics without notice.
Page 88
Electric scissor lifts - Technical characteristics For C10N-1 - For AS only - Technical characteristics Machine C10N-1 Characteristics Metric Imperial Length of machine in stowed position 2,48 m (8 ft2 in) Overall width of machine 0,81 m (2 ft7 in) Platform length 2,30 m (7 ft7 in)
Page 89
Electric scissor lifts - Technical characteristics For OPTIMUM 8-1 - For AS only - Technical characteristics Machine OPTIMUM 8-1 Characteristics Metric Imperial Length of machine in stowed position 1,88 m (6 ft2 in) Overall width of machine 0,76 m (0 ft30 in) Platform length 1,73 m (5 ft8 in)
Page 90
Electric scissor lifts - Technical characteristics For COMPACT 8 (COMPACT 2032E) -Technical characteristics Machine COMPACT 8 COMPACT 2032E Characteristics Metric Imperial Metric Imperial Length of machine in stowed position 2,48 m (8 ft2 in) 2,48 m (8 ft2 in) Overall width of machine...
Page 91
Electric scissor lifts - Technical characteristics Machine COMPACT 8 COMPACT 2032E Characteristics Metric Imperial Metric Imperial Platform elevation time (when empty) 37 s Platform lowering time (when empty) 41 s Low drive speed 1,5 km/h (0,9 mph) 1,5 km/h (0,9 mph)
Page 92
Electric scissor lifts - Technical characteristics For COMPACT 8W (COMPACT 2247E) - Technical characteristics Machine COMPACT 8W COMPACT 2247E Characteristics Metric Imperial Metric Imperial Length of machine in stowed position 2,45 m (8 ft0 in) 2,45 m (8 ft0 in) Overall width of machine 1,20 m (3 ft11 in)
Page 93
Electric scissor lifts - Technical characteristics Machine COMPACT 8W COMPACT 2247E Characteristics Metric Imperial Metric Imperial Platform lowering time (when empty) 56 s Low drive speed 1,5 km/h (0,9 mph) 1,5 km/h (0,9 mph) Micro drive speed 1 km/h (0,6 mph) 1 km/h (0,6 mph) High drive speed...
Page 94
Electric scissor lifts - Technical characteristics For COMPACT 10N (COMPACT 2632E) - Technical characteristics Machine COMPACT 10N COMPACT 2632E Characteristics Metric Imperial Metric Imperial Length of machine in stowed position 2,48 m (8 ft2 in) 2,48 m (8 ft2 in) Overall width of machine 0,81 m (2 ft8 in)
Page 95
Electric scissor lifts - Technical characteristics Machine COMPACT 10N COMPACT 2632E Characteristics Metric Imperial Metric Imperial Tyre type and/ or size 380 x 127 x 30 Platform elevation time (when empty) 46 s Platform lowering time (when empty) 51 s Micro drive speed 1,5 km/h (0,9 mph)
Page 96
Electric scissor lifts - Technical characteristics For COMPACT 10 (COMPACT 2747E) - Technical characteristics Machine COMPACT 10 COMPACT 2747E Characteristics Metric Imperial Metric Imperial Length of machine in stowed position 2,43 m (8 ft0 in) 2,43 m (8 ft0 in) Overall width of machine 1,20 m (3 ft11 in)
Page 97
Electric scissor lifts - Technical characteristics Machine COMPACT 10 COMPACT 2747E Characteristics Metric Imperial Metric Imperial Tyre type and/ or size 380 x 127 x 30 Platform elevation time (when empty) 51 s Platform lowering time (when empty) 42 s Micro drive speed 1,5 km/h (0,9 mph)
Page 98
Electric scissor lifts - Technical characteristics For COMPACT 12 (COMPACT 3347E) - Technical characteristics Machine COMPACT 12 COMPACT 3347E Characteristics Metric Imperial Metric Imperial Length of machine in stowed position 2,43 m (8 ft0 in) 2,43 m (8 ft0 in) Overall width of machine 1,20 m (3 ft11 in)
Page 99
Electric scissor lifts - Technical characteristics Machine COMPACT 12 COMPACT 3347E Characteristics Metric Imperial Metric Imperial Tyre type and/ or size 380 x 127 x 30 Platform elevation time (when empty) 83 s Platform lowering time (when empty) 52 s Micro drive speed 1,5 km/h (0,9 mph)
Page 100
Electric scissor lifts - Technical characteristics For COMPACT 14 (COMPACT 3947E) - Technical characteristics Machine COMPACT 14 COMPACT 3947E Characteristics Metric Imperial Metric Imperial Length of machine in stowed position 2,475 m (8 ft1 in) 2,475 m (8 ft1 in) Overall width of machine 1,206 m (3 ft11 in)
Page 101
Electric scissor lifts - Technical characteristics Machine COMPACT 14 COMPACT 3947E Characteristics Metric Imperial Metric Imperial Platform elevation time (when empty) 68 s Platform lowering time (when empty) 54 s Micro drive speed 0.85 km/h (0.53 mph) 0.85 km/h (0.53 mph) High drive speed 2.8 km/h (1.7 mph)
Page 102
Electric scissor lifts - Technical characteristics For OPTIMUM 6 (OPTIMUM 1530E) - Technical characteristics Machine OPTIMUM 6 OPTIMUM 1530E Characteristics Metric Imperial Metric Imperial Length of machine in stowed position 1.89 m (6 ft2 in) 1.89 m (6 ft2 in) Overall width of machine 0,76 m (2 ft6 in)
Page 103
Electric scissor lifts - Technical characteristics Machine OPTIMUM 6 OPTIMUM 1530E Characteristics Metric Imperial Metric Imperial Platform elevation time (when empty) 21 s Platform lowering time (when empty) 37 s Micro drive speed 0.5 km/h (0.31 mph) 0.5 km/h (0.31 mph) High drive speed 4,5 km/h (2,8 mph)
Page 104
Electric scissor lifts - Technical characteristics For OPTIMUM 8 (OPTIMUM 1930E) - Technical characteristics Machine OPTIMUM 8 OPTIMUM 1930E Characteristics Metric Imperial Metric Imperial Length of machine in stowed position 1.89 m (6 ft2 in) 1.89 m (6 ft2 in) Overall width of machine 0,76 m (2 ft6 in)
Page 105
Electric scissor lifts - Technical characteristics Machine OPTIMUM 8 OPTIMUM 1930E Characteristics Metric Imperial Metric Imperial Platform elevation time (when empty) 23 s Platform lowering time (when empty) 29 s Micro drive speed 0.5 km/h (0,31 mph) 0.5 km/h (0,31 mph) High drive speed 4,5 km/h (2,8 mph)
Page 106
Electric scissor lifts - Technical characteristics For COMPACT 8 (COMPACT 2032E) Single load (Option) - on AS and CE only - Technical characteristics Machine COMPACT 8 CU Characteristics Metric Imperial Length of machine in stowed position 2,48 m (8 ft2 in)
Page 107
Electric scissor lifts - Technical characteristics For COMPACT 10RTE (COMPACT 2668RTE) - Technical characteristics Machine COMPACT 10RTE COMPACT 2668RTE Characteristics Metric Imperial Metric Imperial Length of machine in stowed position 2,65 m (8 ft8 in) 2,65 m (8 ft8 in) Overall width of machine 1,80 m (0 ft71 in)
Page 108
Electric scissor lifts - Technical characteristics Machine COMPACT 10RTE COMPACT 2668RTE Characteristics Metric Imperial Metric Imperial High drive speed 5,8 km/h (3,6 mph) 5,8 km/h (3,6 mph) Hand vibration <2,5 m/s² (98 in/s²) <2,5 m/s² (98 in/s²) Feet vibration <0,5 m/s² (19 in/s²) <0,5 m/s²...
Page 109
Electric scissor lifts - Technical characteristics For COMPACT 12RTE (COMPACT 3368RTE) - Technical characteristics Machine COMPACT 12RTE COMPACT 3368RTE Characteristics Metric Imperial Metric Imperial Length of machine in stowed position 2,65 m (8 ft8 in) 2,65 m (8 ft8 in) Overall width of machine 1,80 m (0 ft71 in)
Page 112
Electric scissor lifts - Technical characteristics Overall dimension specifications Marking COMPACT 12 (COMPACT 3347E) COMPACT 14 (COMPACT 3947E) Mètre Feet inch Mètre Feet inch 3,40 11 ft 1 in 3,40 11 ft 1 in 1,20 3 ft 11 in 1,20 3 ft 11 in 2,38 7 ft 9 in...
Page 113
Electric scissor lifts - Technical characteristics General diagram COMPACT 10RTE (COMPACT 2668RTE) -COMPACT 12RTE (COMPACT 3368RTE) Overall dimension specifications Marking COMPACT 10RTE (COMPACT 2668RTE) COMPACT 12RTE (COMPACT 3368RTE) Mètre Feet inch Mètre Feet inch 3,85 12 ft 7 in 3,85 12 ft 7 in 1,80 5 ft 10 in...
Page 114
Electric scissor lifts - Technical characteristics If outriggers option : Overall dimension specifications Marking COMPACT 10RTE (COMPACT 2668RTE) COMPACT 12RTE (COMPACT 3368RTE) Mètre Feet inch Mètre Feet inch 3,85 12 ft 7 in 3,85 12 ft 7 in 1,80 5 ft 10 in 1,80 5 ft 10 in 2,42...
Electric scissor lifts - Technical characteristics 3.6 - MACHINE C14 (COMPACT 3947E) Working area ft in -3ft 3in 3ft 3in 6ft 7in 9ft 10in-3ft 3in 3ft 3in 14 m 45 ft 11 in 13 m 42 ft 80 in 12 m 39 ft 40 in 11 m 36 ft 10 in...
To avoid the machine tipping over, it must be secured during the test (by a chain or anchorage point). 4.1 - OVERLOAD TEST Load table Machine Test load Pound (lb) Kilogramme (kg) COMPACT 8 (COMPACT 2032E) 437,5 COMPACT 14 (COMPACT 3947E) COMPACT 8W (COMPACT 2247E) COMPACT 10 (COMPACT 2747E) 1240 562,5 COMPACT 12RTE (COMPACT 3368RTE)
(kg) (ft in) (DaN.m) Horizontal ( 1 ) 24 ft 1 in 7.33 Vertical ( 2 ) 24 ft 6 in 7.459 Stability for COMPACT 8 (COMPACT 2032E) - COMPACT 8 CU LONGITUDINAL TRANSVERSAL POSITION POSITION 2,5° 3,5° 2.5° 2420332270...
Page 127
Electric scissor lifts - Technical characteristics Stability table for C8W (COMPACT 2247E) T (°) Moment of tipping over Kilogramme Feet inch Déca Newton Mètre Pound (lb) Mètre (m) (kg) (ft in) (DaN.m) Horizontal ( 1 ) 25 ft 2 in 7,68 Vertical ( 2 ) 24 ft 6 in...
Page 128
Electric scissor lifts - Technical characteristics Stability table for Compact 10N (COMPACT 2632E) T (°) Moment of tipping over Kilogramme Feet inch Déca Newton Mètre Pound (lb) Mètre (m) (kg) (ft in) (DaN.m) Horizontal ( 1 ) 30 ft 7 in 9.32 Vertical ( 2 ) 30 ft 0 in...
Page 129
Electric scissor lifts - Technical characteristics Stability table for COMPACT 10 (COMPACT 2747E) T (°) Moment of tipping over Kilogramme Feet inch Déca Newton Mètre Pound (lb) Mètre (m) (kg) (ft in) (DaN.m) Horizontal ( 1 ) 30 ft 7 in 9.32 Vertical ( 2 ) 31 ft 0 in...
Page 130
Electric scissor lifts - Technical characteristics Stability table for COMPACT 12 (COMPACT 3347E) T (°) Moment of tipping over Kilogramme Feet inch Déca Newton Mètre Pound (lb) Mètre (m) (kg) (ft in) (DaN.m) Horizontal ( 1 ) 37 ft 7 in 11.45 Vertical ( 2 ) 37 ft 3 in...
Page 131
Electric scissor lifts - Technical characteristics Stability table for COMPACT 14 (COMPACT 3947E) T (°) Moment of tipping over Kilogramme Feet inch Déca Newton Mètre Pound (lb) Mètre (m) (kg) (ft in) (DaN.m) Horizontal ( 1 ) 42 ft 8 in 13.01 Vertical ( 2 ) 42 ft 4 in...
Page 132
Electric scissor lifts - Technical characteristics Stability table for OPTIMUM 6 (OPTIMUM 1530E) T (°) Moment of tipping over Kilogramme Feet inch Déca Newton Mètre Pound (lb) Mètre (m) (kg) (ft in) (DaN.m) Horizontal ( 1 ) 18 ft 4 in 5.60 Vertical ( 2 ) 17 ft 10 in...
Page 133
Electric scissor lifts - Technical characteristics Stability table for OPTIMUM 8 (OPTIMUM 1930E) T (°) Moment of tipping over Kilogramme Feet inch Déca Newton Mètre Pound (lb) Mètre (m) (kg) (ft in) (DaN.m) Horizontal ( 1 ) 23 ft 3 in 7,08 Vertical ( 2 ) 22 ft 10 in...
Page 134
Electric scissor lifts - Technical characteristics Stability table for COMPACT 10RTE (COMPACT 2668RTE) T (°) Moment of tipping over Kilogramme Feet inch Déca Newton Mètre Pound (lb) Mètre (m) (kg) (ft in) (DaN.m) Horizontal ( 1 ) 31 ft 10 in 9,70 1592 Vertical ( 2 )
Page 135
Electric scissor lifts - Technical characteristics Stability table for COMPACT 12RTE (COMPACT 3368RTE) T (°) Moment of tipping over Kilogramme Feet inch Déca Newton Mètre Pound (lb) Mètre (m) (kg) (ft in) (DaN.m) Horizontal ( 1 ) 37 ft 9 in 11,50 1772 Vertical ( 2 )
Electric scissor lifts - Technical characteristics 5 - Declaration of conformity CE Declarations of Conformity only apply to machines that are certified for the European market. Declaration of conformity - Electric platforms D D ECLARATION DE CONFORMITE CE ( certificate of conformity with CE-directives) Nom et adresse du constructeur ou son représentant autorisé...
Page 137
Electric scissor lifts - Technical characteristics Declaration of conformity - Thermal platforms D D ECLARATION DE CONFORMITE CE ( certificate of conformity with EC directives) Nom et adresse du constructeur ou son représentant autorisé dans la communauté : Name and address of manufacturer or their authorised agents within the European Community è...
Intervention register 1 - Intervention register In order to benefit from the HAULOTTE® guarantee, each maintenance or repair operation must be entered in the INTERVENTION REGISTER, which can be found at the end of the maintenance book delivered with your machine.
Need help?
Do you have a question about the Compact 8 and is the answer not in the manual?
Questions and answers