Transportation; Putting In Transport Position - Haulotte Compact 8 Operator's Manual

Compact 8 - Compact 8CU - Compact 8W - Compact 10 (Compact 2747E) - Compact 10N (Compact 2632E) -
Compact 10N-1 - Compact 12 (Compact 3347E) - Compact 14 (Compact 3947E)
D
- Operation instructions

5 - Transportation

5.1 - P
UTTING IN TRANSPORT POSITION
During loading, ensure that :
• The loading ramp can support the machine weight.
• The loading ramp is correctly attached to transport vehicle.
• The loading ramp has sufficient grip surface.
• The transport vehicle must be parked on a level surface and must be secured to prevent
rolling away while machine is being loaded or unloaded.
To climb the slope, move progressively the drive joystick ( 108 ).
If the slope is too steep, use a winch in addition to traction.
Do not place yourself below or too close to the machine during loading.
The machine must be completely in the stowed configuration :
• Check the platform is completely empty.
• Platform extension must be retracted in the locked position.
• Drive the machine onto the truck bed.
• Secure the machine to the tie down points provided (See picture).
The manual extension (if fitted) must be retracted and locked during transport or towing.
4001182150 E 08.21 USA / GB 85
A
B
C
D
E
F
G
H
I