H12 SX - HS3388 RT - H12 SXL - HS3388 RT XL - H15 SX - HS4388 RT - H15 SXL - H18 SX - HS5388 RT - H18 SXL
D
- Operation instructions
3 - Platform control box
3.1 -
TO START AND STOP THE MACHINE
To start the machine :
At the ground control box :
• The E-stop button ( 15 ) on the ground control box must be in ON position (pulled out / activated).
• Turn the key on the control box activation selector switch ( 72 ) to the left to energize the platform
control box.
At the platform control box :
• Pull the E-stop button (46).
• Press the engine start-up selector ( 61 ) to start the machine.
To stop the machine :
• Push in the E-stop button (46).
3.2 -
DRIVE AND STEER CONTROL
Activate the controls and the Enable Switch simultaneously to perform the various movements. Except for
stabilizing movements.
Command
Driving
Front-axle steering
Drive speed
N.B.-:-The release of the selectors and (or) joysticks causes all movement to stop.
4001011590
Move the drive joystick ( 108 ) forwards to drive the machine forwards.
Move the drive joystick ( 108 ) backwards to drive in reverse.
Push the front-axle steering selector thumb switch ( 108 ) to the right to steer to
the right.
Push the front-axle steering selector thumb switch ( 108 ) to the left to steer to
the left.
Position the drive speed selector switch ( 59 ) on
Position the driving speed selector ( 58 ) on
(crossing uneven ground, slope).
Position the driving speed selector ( 57 ) on
distance, final approach, unloading from lorries/trucks).
01.20
Action
for high-speed driving.
for medium speed driving
for low-speed driving (short
USA / GB
A
B
C
D
E
F
G
H
I
71