Towing; Free Wheel Mode - Haulotte Compact 8 Operator's Manual

Compact 8 - Compact 8CU - Compact 8W - Compact 10 (Compact 2747E) - Compact 10N (Compact 2632E) -
Compact 10N-1 - Compact 12 (Compact 3347E) - Compact 14 (Compact 3947E)
D
- Operation instructions
5.4 - T
OWING
In the event of a machine breakdown, the machine can be towed a short distance to load it onto a transport
vehicle :
• Ensure that no one is in the platform during towing.
• Before towing, ensure that the platform is fully lowered.
• The platform must be empty.
• ALWAYS keep personnel and obstructions clear of the aerial work platform when brakes are released.
To tow a broken-down machine, release brake (Refer to
mode).
Perform this operation on flat ground with wheels chocked.
In the towing configuration, the machine braking system is inactive. Use of a drawbar is
recommended :
• Do not exceed the maximum freewheel speed (Refer to
specifications).
• Do not exceed a grade of 25%.

5.4.1 - Free wheel mode

To tow a broken-down machine, perform manual brake release.
Perform these operations on flat, horizontal ground. Failing that, block the wheels to immobilize the
machine. When drive hubs are disengaged, the machine is in free wheel mode and the brake system no
longer functions.
COMPACT 8 - COMPACT 8CU - COMPACT 8W - COMPACT 10N - COMPACT 2632E -
COMPACT 10 - COMPACT 2747E - COMPACT 12 - COMPACT 3347E - COMPACT 14 -
COMPACT 3947E
After towing the machine :
In the towing configuration, the machine is no longer slowed down. Use a drawbar to avoid any risk of
accident.
Do not exceed 5 km/h (3,10 mph) .
88 4001182150
1. Close the tap ( NV1 ).
2. Open the tap ( NV2 ).
3. Push the pump by hand ( HP1 ) until the
brake is fully released.
4. Slow towing.
5. Close the tap ( NV2 )
6. Open the tap ( NV1 ).
E 08.21
Section D 5.4.1 - Free wheel
Section B 4.1 - Technical
NV2
NV1
HP1
USA / GB