I-Mark
Select when using the media of I-mark type. Use the reflective type sensor.
None
Disables the media sensor.
•
If you have selected [Dispenser] in the [Print Mode] menu, only [Gap] and [I-Mark] will
be available.
•
If you have selected [Linerless tearoff] in the [Print Mode] menu, only [I-Mark] and
[None] will be available.
[Darkness Range]
Set the range of the print darkness.
The darkness range affects the print darkness.
The options are as follows.
A, B, C, D, E, F
•
The normal setting is A. You can also select B to F but the print darkness does not
change.
[Darkness]
Specify the print darkness from 10 steps.
The setting range is from 1 to 10. 1 is the lightest and 10 is the darkest.
•
To further fine tune the print darkness, set [Printing] > [Advanced] > [Adjustments] >
[Darkness Adjust].
[Imaging]
Set the print reference position in the vertical and horizontal directions.
The setting items are as follows:
145