SATO PW4NX Operator's Manual page 174

[Enable]
Enable or disable the SFTP function.
The options are as follows:
Enabled
Enable the SFTP function.
Disabled
Disable the SFTP function.
[SFTP Timeout]
Set the connection timeout period between the product's SFTP server and clients.
Specify the maximum number of seconds that the product's SFTP server will allow clients to stay
connected without receiving any data on either the control or data connection.
The setting range is from 10 to 3600 seconds.
[Authentication Method]
Set the SFTP authentication method.
The options are as follows:
• [Password Authentication]
• [Key Authentication]
[Password Authentication]
Set the password authorization.
Available only if you have selected [Password Authentication] in the [Authentication Method] menu.
User
Shows the user name.
Password
Set the password.
You can enter 4 to 32 characters. You can use alphabet (capital and small letters), numbers and
symbols.
[Key Authentication]
Shows information about authentication.
Available only if you have selected [Key Authentication] in the [Authentication Method] menu.
[SNMP]
Set the functions for SNMP.
The SNMP function enables you to monitor and manage a UDP/IP based network.
The setting items are as follows:
174
[Network]