Table of Contents
Advertisement
[Password]
Set the password.
You can enter 0 to 32 characters. Alphabets, numbers and symbols can be used.
[Anon. Outer ID]
Set the external ID.
Appears if you have selected [FAST], [PEAP], or [TTLS] in the [EAP Mode] menu.
You can enter 0 to 63 characters. Alphabets, numbers and symbols can be used.
[Verify Server Cert.]
Enable or disable server certificate validation.
Appears if you have selected anything other than [LEAP] in the [EAP Mode] menu.
The options are as follows:
Enabled
Enable server certificate validation.
Disabled
Disable server certificate validation.
[Private Key P/W]
Set the Private Key password.
Appears only if you have selected [TLS] in the [EAP Mode] menu.
You can enter 0 to 64 characters. Alphabets, numbers and symbols can be used.
[PAC Auto Provisioning]
Enable or disable PAC auto provisioning.
Appears if you have selected [FAST] in the [EAP Mode] menu.
The options are as follows:
Enabled
Enable PAC auto provisioning.
Disabled
Disable PAC auto provisioning.
[PAC Password]
Set the PAC password.
Appears only if you have selected [FAST] in the [EAP Mode] menu and if you have selected [Disabled]
in [PAC Auto Provisioning].
You can enter 0 to 64 characters. Alphabets, numbers and symbols can be used.
171
Advertisement
Table of Contents
