Table of Contents
Advertisement
3. Select [Printing] using the
4. Select the [Advanced] > [Adjustments] > [Pitch] menu using the
and then press the
The [Pitch] screen appears.
5. Change the setting value. Press the
and then press the
The setting range is from -30 to +30 dots.
•
Depending on the operating mode, if the setting is higher than -8dot, the labels may fall
off the rollers or the back edge of the labels may be folded. If this happens, set the print
position in the [Printing] > [Imaging] menu.
•
You can change the units to dots, " (inches), or mm in the [System] > [Regional] >
[Unit] menu.
6. Press the
button (
7. Press the
button to change to Offline mode.
/
buttons, and then press the
button.
/
/
button to enter the number to the text box.
) to save the setting value.
290
Adjusting the Print Position
/
buttons to select a number
button.
/
buttons,
Advertisement
Table of Contents
