Settings To Match The Media; Media Sensor Type - SATO PW4NX Operator's Manual

Settings to Match the Media

Media Sensor Type

The product adjusts the print position precisely by detecting I-marks or gaps on the media (label) using
media sensors.
The I-marks or gaps on each type of media are as follows:
I-mark
(1) Media feed direction
Set the sensor type to detect the print position according to the media to be used.
You can set the sensor type by using the startup guide. Alternatively, the following procedure can be
used.
1. Press the
The product changes to Offline mode.
button (OFFLINE) or
Gap
button in Online mode.
133