Table of Contents
Advertisement
[Allow
[TCP Source
Services
Port]
And Ports]
[SFTP]
-
[SNMP
-
Agent]
[WEBC]
80,443,8080
[WebConfig]
-
*The values may vary depending on other settings.
[Custom Settings]
Specify the ICMP type or the port number of TCP or UDP to allow communication.
Available only if you have selected [Enabled] in the [Enable] menu.
The setting items are as follows:
[TCP Source Port]
Register the TCP source port number to allow communication.
[Existing Port No.]
The port number of the items enabled in [Allow Services And Ports] are shown.
[Additional Port No.]
Register the TCP source port number to allow communication.
The acceptable input values are as follows:
Active port number
Specifying multiple values
Specifying a range
Maximum number of
specifications
No setting
Input Example
Port number
10000
10000,10001,10002,10003
[TCP
Destination
Port]
22
-
-
80,443
An integer from 1 to 65535
Delimit active port numbers using a comma ","
Create a range of active port numbers using a colon ":" (Input in the
order of low port number: high port number)
21 ports in total by specifying with either numbers or a range
Blank
Comments
-
This results in the same ports in both settings to
be allowed.
191
[UDP
[UDP
Source
Destination
Port]
Port]
-
-
-
161
53
-
-
-
[ICMP Type]
-
-
-
-
Advertisement
Table of Contents
