Table of Contents
Advertisement
Replacing Consumable Parts
Replacing the Print Head
You can easily remove and replace a damaged or worn print head.
•
Do not power on or off the product, connect or disconnect the power cord while your
hands are wet. Doing so could cause an electric shock.
•
Disconnect the power supplies, such as the power cord and the battery before you
begin replacing the print head.
•
Wear gloves before replacing the print head, to prevent damage to the print head.
1. Make sure that the product is powered off, and then remove the battery.
2. Press the cover open button (1) to open the top cover (2).
3. Press the dispenser roller release button (3), and pull out the dispenser unit (4).
4. Remove the media if it is already loaded.
5. Take out the print head (5).
335
Advertisement
Table of Contents
