Table of Contents
Advertisement
[Kanji Command]
Set the product behavior when the received data includes the Kanji command ESC+K5, ESC+K6 or
ESC+K7.
The options are as follows:
Enabled
Change the Kanji commands ESC+K5, ESC+K6 and ESC+K7 in the received data to the proper
commands and print.
◦
ESC+K5: 16x16 dots Kanji in horizontal line with one-byte character
◦
ESC+K6: 24x24 dots Kanji in horizontal line with one-byte character
◦
ESC+K7: 22x22 dots Kanji in horizontal line
Disabled
Do not change the Kanji commands ESC+K5, ESC+K6 and ESC+K7 in the received data. The
product behavior when it receives these commands is as follows:
◦
ESC+K5: Print with 40x40 dots Kanji in horizontal line.
◦
ESC+K6: A command error occurs and the data will not be printed.
◦
ESC+K7: A command error occurs and the data will not be printed.
[Call Font/Logo]
Set how to process the character code specified in Recall font & logo command (ESC+RF).
The options are as follows:
Enabled
Character codes are processed in little-endian format.
Disabled
Character codes are processed in big-endian format.
[PDF417 ECC Level fixed]
Set whether to print the PDF417 code with the security level specified by the PDF417 printing
command.
The options are as follows:
Enabled
Print the PDF417 code with the security level specified by the PDF417 printing command.
Disabled
Print the PDF417 code with the security level specified by the PDF417 (or higher) printing
command.
205
Advertisement
Table of Contents
